RTL-SDR - Cronologia

Thegamer. il 12:42, 27 nov 2013

2013-11-27T12:42:09Z

Itec il 18:28, 16 nov 2013

2013-11-16T18:28:29Z

Itec il 18:10, 16 nov 2013

2013-11-16T18:10:03Z

Itec: Creata pagina con '==Installazione== (da: http://zr6aic.blogspot.dk/2013/02/setting-up-my-raspberry-pi-as-sdr-server.html) First update you Raspberry Pi wheezy Linux to the latest version. su...'

2013-11-16T18:06:30Z

Creata pagina con '==Installazione== (da: http://zr6aic.blogspot.dk/2013/02/setting-up-my-raspberry-pi-as-sdr-server.html) First update you Raspberry Pi wheezy Linux to the latest version. su...'

Nuova pagina

==Installazione==
(da: http://zr6aic.blogspot.dk/2013/02/setting-up-my-raspberry-pi-as-sdr-server.html)

First update you Raspberry Pi wheezy Linux to the latest version.

sudo apt-get update

Now install the required utils to compile the RTL-2832U USB dongle driver

sudo apt-get install git cmake libusb-1.0-0-dev build-essential

Now install the RTL-2832U USB dongle driver src and compile

git clone git://git.osmocom.org/rtl-sdr.git

cd rtl-sdr/

mkdir build

cd build

cmake ../ -DINSTALL_UDEV_RULES=ON

make

sudo make install

sudo ldconfig

if it was successful you should see no return on the previous command.

I have been told that the Raspberry crash if you don't reboot before inserting the dongle.

so just run sudo shutdown -r 0

Install the RTL-2832U USB dongle on external powered USB HUB

sudo ldconfig

==ADSB==
(da: http://www.satsignal.eu/raspberry-pi/dump1090.html)

E' possibile ricevere le posizioni degli aerei in volo ricevendo i segnali inviati dai trasponder.

Installazione:

cd ~ (goes to your home directory)

git clone git://github.com/MalcolmRobb/dump1090.git

cd dump1090

make

./dump1090 --interactive

← Versione meno recente		Versione delle 12:42, 27 nov 2013
Riga 44:		Riga 44:

	==ADSB==		==ADSB==
		+
		+	https://en.wikipedia.org/wiki/Automatic_dependent_surveillance-broadcast
		+
	(da: http://www.satsignal.eu/raspberry-pi/dump1090.html)		(da: http://www.satsignal.eu/raspberry-pi/dump1090.html)

@@ Riga 35: / Riga 35: @@
   sudo ldconfig
@@ Riga 50: / Riga 56: @@
   make
   ./dump1090  --interactive

@@ Riga 5: / Riga 5: @@
 First update you Raspberry Pi wheezy Linux to the latest version.
-sudo apt-get update
+ sudo apt-get update
 Now install the required utils to compile the RTL-2832U USB dongle driver
-sudo apt-get install git cmake libusb-1.0-0-dev build-essential
+ sudo apt-get install git cmake libusb-1.0-0-dev build-essential
 Now install the RTL-2832U USB dongle driver src and compile
-git clone git://git.osmocom.org/rtl-sdr.git
+ git clone git://git.osmocom.org/rtl-sdr.git
+ cd rtl-sdr/
-cd rtl-sdr/
+ mkdir build
+ cd build
-mkdir build
+ cmake ../ -DINSTALL_UDEV_RULES=ON
+ make
-cd build
+ sudo make install
+ sudo ldconfig
 if it was successful you should see no return on the previous command.
-I have been told that the Raspberry crash if you don't reboot before inserting the dongle.
+I have been told that the Raspberry crash if you don't reboot before inserting the dongle. So just run
-so just run sudo shutdown -r 0
+ sudo shutdown -r 0
 Install the RTL-2832U USB dongle on external powered USB HUB
-sudo ldconfig
+ sudo ldconfig
@@ Riga 52: / Riga 45: @@
 Installazione:
-cd  ~  (goes to your home directory)
+ cd  ~
   git  clone  git://github.com/MalcolmRobb/dump1090.git
-git  clone  git://github.com/MalcolmRobb/dump1090.git
+ cd  dump1090
+ make
-cd  dump1090
+ ./dump1090  --interactive