Differenze tra le versioni di "Gruppo Meteo/HowTo/server-centos"

Da raspibo.
Jump to navigation Jump to search
 
(39 versioni intermedie di 2 utenti non mostrate)
Riga 1: Riga 1:
 +
= Installazione RMAP server su centos 8 =
 +
 +
== istallazione sistema operativo ==
 +
 +
dnf -y install epel-release
 +
dnf install yum-plugin-copr
 +
dnf copr enable simc/stable
 +
dnf copr enable pat1/rmap
 +
dnf config-manager --set-enabled PowerTool
 +
dnf groupinstall rmap
 +
dnf install mosquitto mosquitto-auth-plug
 +
dnf install arkimet
 +
 +
useradd rmap
 +
 +
 +
/etc/selinux/config
 +
 +
SELINUX=disabled
 +
 +
/etc/tmpfiles.d/rmap.conf
 +
d /run/wsgirmap 0755 rmap rmap -
 +
d /var/run/rmap 0755 rmap rmap -
 +
d /var/run/httpd 0755 rmap rmap -
 +
 +
mkdir /rmap
 +
chmod go+rx /rmap
 +
 +
/etc/sysconfig/crond
 +
CRONDARGS=-s -m off
 +
 +
mkdir /var/log/rmap
 +
chown -R rmap:rmap /var/log/rmap
 +
 +
== postgresql ==
 +
dnf module disable postgresql:10
 +
dnf module enable postgresql:12
 +
dnf install postgresql-server postgresql-contrib
 +
dnf install python3-psycopg2
 +
 +
postgresql-setup --initdb --unit postgresql
 +
 +
 +
 +
/var/lib/pgsql/data/pg_hba.conf
 +
 +
# TYPE  DATABASE        USER            ADDRESS                METHOD                                                               
 +
 +
# "local" is for Unix domain socket connections only                                                                                 
 +
# allow postgres user to use "ident" authentication on Unix sockets                                                                 
 +
local  all            postgres                                ident
 +
# allow all other users to use "md5" authentication on Unix sockets                                                                 
 +
local  all            all                                    md5
 +
# IPv4 local connections:                                                                                                           
 +
host    all            all            127.0.0.1/32            md5
 +
# IPv6 local connections:                                                                                                           
 +
host    all            all            ::1/128                md5
 +
 +
 +
/var/lib/pgsql/data/postgresql.conf
 +
 +
max_connections = 100
 +
shared_buffers = 128MB
 +
work_mem = 100MB
 +
maintenance_work_mem = 200MB
 +
effective_cache_size = 1GB
 +
 +
 +
mkdir /etc/systemd/system/postgresql.service.d/
 +
/etc/systemd/system/postgresql.service.d/rmap.conf
 +
[Service]
 +
 +
# Location of database directory
 +
Environment=PGDATA=/rmap/pgsql/data
 +
 +
mkdir /rmap/pgsql/
 +
chown postgres:postgres /rmap/pgsql/
 +
mv /var/lib/pgsql/data /rmap/pgsql/
 +
 +
su - postgres
 +
initdb
 +
exit
 +
 +
systemctl enable postgresql.service
 +
systemctl start postgresql.service
 +
 +
su - postgres
 +
createuser -P -e rmapadmin
 +
createdb --owner=rmapadmin rmapadmin
 +
exit
 +
 +
/etc/rmap/rmap-site.cfg
 +
[database]
 +
DATABASE_ENGINE = 'postgresql_psycopg2' # 'postgresql_psycopg2', 'postgresql', 'mysql', 'sqlite3' or 'ado_mssql'.                   
 +
DATABASE_NAME = 'rmapadmin'            # Or path to database file if using sqlite3.                                                 
 +
DATABASE_USER = 'rmapadmin'            # Not used with sqlite3.                                                                     
 +
DATABASE_PASSWORD = 'rmapadmin'        # Not used with sqlite3.                                                                     
 +
DATABASE_HOST = 'localhost'            # Set to empty string for localhost. Not used with sqlite3.                                 
 +
DATABASE_PORT = '5432'                  # Set to empty string for default. Not used with sqlite3.                                   
 +
 +
rmapctrl --syncdb
 +
 +
 +
 +
su - postgres
 +
createuser -P -e rmap
 +
createdb --owner=rmap report_fixed
 +
createdb --owner=rmap report_mobile
 +
createdb --owner=rmap sample_fixed
 +
createdb --owner=rmap sample_mobile
 +
 +
 +
exit
 +
 +
== apache ==
 +
 +
Collect static files from django apps:
 +
 +
mkdir global_static
 +
export DJANGO_SETTINGS_MODULE=rmap.settings
 +
django-admin collectstatic
 +
rmdir global_static
 +
 +
yum install python3-mod_wsgi
 +
 +
useradd -r rmap
 +
mkdir /home/rmap
 +
chown rmap:rmap /home/rmap
 +
 +
mkdir /rmap/cache
 +
chown rmap:rmap /rmap/cache
 +
 +
/etc/httpd/conf.modules.d/00-mpm.conf
 +
LoadModule mpm_worker_module modules/mod_mpm_worker.so
 +
 +
<IfModule mpm_worker_module>
 +
#StartServers          2
 +
#MaxClients          150
 +
#MinSpareThreads      25
 +
#MaxSpareThreads      75
 +
#ThreadsPerChild      25
 +
#MaxRequestsPerChild  0
 +
ServerLimit        16
 +
StartServers        2
 +
MaxRequestWorkers  150
 +
MinSpareThreads    10
 +
MaxSpareThreads    35
 +
ThreadsPerChild    15
 +
MaxRequestWorkers      240
 +
MaxConnectionsPerChild 10000
 +
</IfModule>
 +
 +
 +
/etc/httpd/conf.d/rmap.conf
 +
ServerName rmap.it
 +
 +
WSGISocketPrefix /run/wsgirmap/rmap
 +
WSGIDaemonProcess www.rmap.cc user=rmap group=rmap maximum-requests=100 graceful-timeout=200 processes=10 threads=5 request-timeout=180 socket-timeout=180 header-buffer-  size=65000
 +
WSGIProcessGroup www.rmap.cc
 +
WSGIApplicationGroup %{GLOBAL}
 +
 +
 +
<VirtualHost *:80 >
 +
    ServerName rmap.it
 +
    ServerAlias rmap.cc rmapv.rmap.cc rmapv.rmap.it www.rmap.cc www.rmapv.rmap.cc www.rmap.it www.rmapv.rmap.it localhost localhost.localdomain 127.0.0.1 partecipa.rainbolife.eu
 +
    Include conf.d/rmap.inc
 +
</VirtualHost>
 +
 +
/etc/httpd/conf.d/rmap.inc
 +
 +
Alias /download /var/www/html/download
 +
Alias /repo    /var/www/html/repo
 +
Alias /showroom /var/www/html/showroom
 +
Alias /arkiweb  /var/www/html/arkiweb
 +
 +
#Alias /static/admin /usr/lib/python2.7/site-packages/django/contrib/admin/static/admin
 +
#<Directory "/usr/lib/python2.7/site-packages/django/contrib/admin/static/admin">
 +
#     Require all granted
 +
#</Directory>
 +
 +
Alias /static  /usr/share/rmap/static
 +
<Directory /usr/share/rmap/static>
 +
        Require all granted
 +
        SetHandler None
 +
</Directory>
 +
 +
Alias /media /usr/share/rmap/media
 +
<Directory /usr/share/rmap/media>
 +
        Require all granted
 +
        SetHandler None
 +
</Directory>
 +
 +
WSGIScriptAlias / /usr/bin/rmap.wsgi
 +
#WSGIImportScript /usr/bin/rmap.wsgi process-group=%{GLOBAL} application-group=%{GLOBAL}
 +
#WSGIPythonPath /path/to/mysite.com
 +
 +
#WSGIDaemonProcess rmap processes=5 threads=5
 +
#WSGIDaemonProcess rmap
 +
#WSGIProcessGroup rmap
 +
 +
<Directory /usr/bin>
 +
<Files rmap.wsgi>
 +
Require all granted
 +
</Files>
 +
</Directory>
 +
 +
<Location /auth>
 +
    Order Deny,Allow
 +
    Deny from all
 +
    Allow from 127.0.0.1
 +
</Location>
 +
 +
SecRuleEngine On
 +
 +
#The first SecAction initializes the state, in this case by IP address.
 +
#The second SecAction deprecates the counter by 1 every 60 second.
 +
#This is setting the base rate of our rate limit
 +
#Then the Header definition ensures a header is set whenever a request
 +
#is rate limited, giving a hint to the client that they shouldn’t try
 +
#again for 10 seconds. This is obviously just a guide and a lot of
 +
#clients don’t implement it (and it’s really only valid on a 503 status
 +
#anyway) so it’s a little bit of wishful thinking really.
 +
#Then we define a neat ErrorDocument for the 509 response to give a better clue to the client about what is happening.
 +
 +
 +
<Location /borinud>
 +
 +
  # whitelist localhost
 +
  #SecRule REMOTE_ADDR "@contains 127.0.0.1" "id:1,phase:1,nolog,allow,ctl:ruleEngine=Off"
 +
  SecRule REMOTE_ADDR "^127.0.0.1$" nolog,allow,id:1
 +
 +
  # initialise the state based on ip address
 +
  SecAction id:2,initcol:IP=%{REMOTE_ADDR}
 +
 +
  # set the base rate to one per 15 minutes
 +
  SecAction id:3,deprecatevar:IP.CALLS_LIMIT=1/900
 +
 +
  # if greater then burst_rate_limit then pause set RATELIMITED var and then return 503
 +
  SecRule IP:CALLS_LIMIT "@gt 60" "id:4,phase:2,pause:300,deny,status:503,setenv:RATELIMITED,skip:1"
 +
 +
  # if above rule doesnt match increment the count
 +
  SecAction id:5,setvar:IP.CALLS_LIMIT=+1
 +
 +
  # set a header when ratelimited
 +
  Header always set Retry-After "10" env=RATELIMITED
 +
 +
</Location>
 +
 +
ErrorDocument 503 "Service Unavailable"
 +
 +
 +
chkconfig httpd on
 +
service httpd start
 +
 +
== Arkimet ==
 +
 +
dnf install arkimet arkimet-postprocessor-suite
 +
useradd  -r arkimet
 +
mkdir /home/arkimet
 +
chown arkimet:arkimet /home/arkimet
 +
mkdir /rmap/arkimet/
 +
chown -R arkimet:arkimet /rmap/arkimet/
 +
mkdir /var/log/arkimet
 +
chown -R arkimet:arkimet /var/log/arkimet
 +
 +
 +
/etc/sysconfig/arkimet
 +
DATASET_CONFIG="/rmap/arkimet/arkimet.conf"
 +
 +
 +
Create file /etc/arkimet/scan/bufr_generic_mobile_rmap.py:
 +
 +
from arkimet.scan.bufr import Scanner, read_area_mobile, read_proddef
 +
 +
 +
def scan(msg, md):
 +
    if msg.report == "mobile":
 +
        area = read_area_mobile(msg)
 +
        proddef = read_proddef(msg)
 +
        if area:
 +
            md["area"] = {"style": "GRIB", "value": area}
 +
        if proddef:
 +
            md["proddef"] = {"style": "GRIB", "value": proddef}
 +
    else:
 +
        return False
 +
 +
 +
Scanner.register("generic", scan, priority=1)
 +
 +
 +
systemctl daemon-reload
 +
chkconfig arkimet on
 +
service arkimet start
 +
 +
== Sincronizzazione DB ==
 +
 +
=== Server di origine ===
 +
 +
rmapctrl --dumpdata > dumpdata.json
 +
 +
rimuovere le prime righe che non sono json
 +
 +
dbadb export --dsn="mysql:///report_fixed?user=rmap&password=****" > report_fixed.bufr
 +
dbadb export --dsn="mysql:///report_mobile?user=rmap&password=****" > report_mobile.bufr
 +
dbadb export --dsn="mysql:///sample_fixed?user=rmap&password=****" > sample_fixed.bufr
 +
dbadb export --dsn="mysql:///sample_mobile?user=rmap&password=****" > sample_mobile.bufr
 +
 +
 +
=== Server di destinazione ===
 +
 +
Da interfaccia web admin rimuovere TUTTI gli utenti (compreso rmap)
 +
 +
rmapctrl --loaddata=dumpdata.json
 +
 +
 +
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/report_fixed" report_fixed.bufr
 +
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/report_mobile" report_mobile.bufr
 +
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/sample_mobile" sample_mobile.bufr
 +
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/sample_fixed" sample_fixed.bufr
 +
 +
cd /usr/share/rmap/
 +
rsync -av utente@serverorigine:/usr/share/rmap/media .
 +
 +
== Mosquitto ==
 +
 +
mkdir /etc/mosquitto/conf.d
 +
mkdir /rmap/mosquitto
 +
chown mosquitto:mosquitto /rmap/mosquitto
 +
 +
/etc/mosquitto/conf.d/rmap.conf
 +
persistent_client_expiration 1d
 +
allow_anonymous true
 +
password_file /etc/mosquitto/pwfile
 +
acl_file /etc/mosquitto/aclfile
 +
log_type error
 +
log_type warning
 +
auth_plugin /usr/lib64/auth-plug.so
 +
auth_opt_backends http
 +
auth_opt_http_hostname localhost
 +
auth_opt_http_ip 127.0.0.1
 +
auth_opt_http_port 80
 +
auth_opt_http_getuser_uri /auth/auth
 +
auth_opt_http_superuser_uri /auth/superuser
 +
auth_opt_http_aclcheck_uri /auth/acl
 +
persistence true
 +
persistence_location /rmap/mosquitto/
 +
 +
/etc/mosquitto/aclfile
 +
topic read #
 +
topic write test/#
 +
 +
# This only affects clients with username "rmap".
 +
user rmap
 +
topic #
 +
 
 +
pattern write rmap/%u/#
 +
pattern write sample/%u/#
 +
 +
pattern write report/%u/#
 +
pattern write fixed/%u/#
 +
 +
pattern write mobile/%u/#
 +
 +
pattern write maint/%u/#
 +
 +
pattern write rpc/%u/#
 +
 +
remove everythings and add in /etc/mosquitto/mosquitto.conf
 +
include_dir /etc/mosquitto/conf.d
 +
pid_file /var/run/mosquitto.pid
 +
 +
 +
touch /etc/mosquitto/pwfile
 +
 +
chkconfig mosquitto on
 +
service mosquitto start
 +
 +
if the package use systemd:
 +
create /etc/systemd/system/mosquitto.service.d/rmap.conf
 +
[Service]
 +
Restart=always
 +
RestartSec=15
 +
 +
if the package use systemV:
 +
/etc/monit.d/mosquitto
 +
 +
check process mosquitto with pidfile /var/run/mosquitto.pid
 +
    start program = "/etc/init.d/mosquitto restart"
 +
    stop program = "/etc/init.d/mosquitto stop"
 +
    if failed host localhost port 1883 timeout 30 seconds retry 3 then restart
 +
 +
== Rabbitmq ==
 +
 +
curl -s https://packagecloud.io/install/repositories/rabbitmq/rabbitmq-server/script.rpm.sh |bash
 +
curl -s https://packagecloud.io/install/repositories/rabbitmq/erlang/script.rpm.sh | sudo bash
 +
 +
dnf install rabbitmq-server
 +
 +
 +
in /etc/rabbitmq/rabbitmq.config
 +
 +
[
 +
  {rabbit,
 +
    [
 +
      {auth_backends, [rabbit_auth_backend_internal, rabbit_auth_backend_http]},
 +
      {loopback_users, []}
 +
    ]
 +
  },
 +
  {rabbitmq_auth_backend_http,
 +
    [{user_path,    "http://localhost/auth/user"},
 +
      {vhost_path,    "http://localhost/auth/vhost"},
 +
      {resource_path, "http://localhost/auth/resource"}
 +
    ]
 +
  }
 +
].
 +
 +
 +
rabbitmq-plugins enable rabbitmq_auth_backend_http
 +
rabbitmq-plugins enable rabbitmq_management
 +
#rabbitmq-plugins enable rabbitmq_management_visualiser
 +
rabbitmq-plugins enable rabbitmq_shovel
 +
rabbitmq-plugins enable rabbitmq_shovel_management
 +
 +
chkconfig rabbitmq-server on
 +
service rabbitmq-server start
 +
 +
 +
login at management interface with user "guest" and password "guest"
 +
on overview page use import definition to configure exchange, queue and users
 +
with the same management interface remove "guest" user and login with a new real user
 +
 +
Per attivare uno showell:
 +
rabbitmqctl set_parameter shovel report_mobile '{"src-protocol": "amqp091", "src-uri": "amqp://rmap:<password>@rmap.cc", "src-queue": "report_mobile_saved",
 +
"dest-protocol": "amqp091", "dest-uri": "amqp://rmap:<password>@", "dest-queue": "report_mobile"}'
 +
 +
problema non risolto:
 +
se si trasferiscono dati scritti da un utente autenticandosi con un altro utente la security su user_id lo vieta.
 +
https://www.rabbitmq.com/shovel-dynamic.html
 +
bisognerebbe riuscire a settare "user_id" tramite il parametro "dest-publish-properties" nel formato json sopra ma non funziona
 +
 +
== Monit ==
 +
 +
yum install monit
 +
 +
comment everithings and add in /etc/monitrc
 +
set daemon  60              # check services at 1-minute intervals
 +
set log syslog
 +
set httpd port 5925 and
 +
    allow rmap:<password>        # require user 'admin' with password 'monit'
 +
    allow @monit          # allow users of group 'monit' to connect (rw)
 +
    allow @users readonly  # allow users of group 'users' to connect readonly
 +
include /etc/monit.d/*
 +
 +
 +
cd /etc/monit.d/
 +
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/monit.d/rmap
 +
 +
chkconfig monit on
 +
service monit start
 +
 +
== Cron ==
 +
 +
cd /etc/cron.d
 +
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/arpae_aq_ckan
 +
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/dballe2arkimet
 +
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/luftdaten
 +
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/rmap_generate_summary_cache
 +
 +
== Arkiweb ==
 +
 +
AL MOMENTO NON DISPONIBILE SU CENTOS 8
 +
NOT AVAILABLE ON CENTOS 8
 +
 +
dnf install arkiweb
 +
 +
/etc/httpd/conf.d/arkiweb.conf
 +
 +
ScriptAlias /services/arkiweb/ /usr/lib64/arkiweb/
 +
Alias /arkiweb  /var/www/html/arkiweb
 +
 +
<Directory "/usr/lib64/arkiweb">
 +
        AllowOverride None
 +
        Options +ExecCGI
 +
 +
        Order allow,deny
 +
        Allow from all
 +
 +
        # ARKIWEB_CONFIG is mandatory!
 +
        SetEnv ARKIWEB_CONFIG /rmap/arkimet/arkiweb.config
 +
       
 +
 +
        Require all granted
 +
 +
        # Authentication (optional)
 +
        #
 +
        # Basic authentication example:
 +
        # SetEnv ARKIWEB_RESTRICT REMOTE_USER
 +
        # AuthType Basic
 +
        # AuthUserFile /etc/arkiweb.passwords
 +
        # require valid-user
 +
</Directory>
 +
 +
Alias /arkiwebjs/ /usr/share/arkiweb/public/
 +
<Directory "/usr/share/arkiweb/public">
 +
          #Require all granted
 +
          AllowOverride None
 +
 +
          Order allow,deny
 +
          Allow from all
 +
 +
          Require all granted
 +
 +
</Directory>
 +
 +
mkdir /var/www/html/arkiweb/
 +
cp /usr/share/doc/arkiweb/html/example/index.html /var/www/html/arkiweb/index.html
 +
 +
/rmap/arkimet/arkiweb.config
 +
 +
[arpav]
 +
bounding = POLYGON ((12.3693200000000001 44.9166299999999978, 11.3025699999999993 45.0306599999999975, 11.0090299999999992 45.2172600000000031, 10.8328900000000008 45.3717499999999987, 10.7659300000000009 45.5176999999999978, 11.8763699999999996 46.4992599999999996, 12.4241600000000005 46.6514799999999994, 12.7082800000000002 46.5699699999999979, 13.0772700000000004 45.6406399999999977, 12.3693200000000001 44.9166299999999978))
 +
filter = product: BUFR:t=arpav
 +
index = reftime, area, product, origin, proddef
 +
name = arpav
 +
path = http://arkiserver:8090/dataset/arpav
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[meteonetwork]
 +
bounding = POLYGON ((12.0994399999999995 43.7931499999999971, 9.8880599999999994 44.5129299999999972, 9.4983599999999999 44.6443500000000029, 9.4705399999999997 44.6982100000000031, 9.4444999999999997 44.9392799999999966, 9.4909800000000004 45.0587200000000010, 11.8647899999999993 46.5125900000000030, 12.1300000000000008 46.5499999999999972, 12.9021600000000003 45.6111099999999965, 12.7495600000000007 43.9628200000000007, 12.6686999999999994 43.8718500000000020, 12.6577099999999998 43.8649699999999996, 12.0994399999999995 43.7931499999999971))
 +
filter = product: BUFR:t=mnw
 +
index = reftime, area, product, origin, proddef
 +
name = meteonetwork
 +
path = http://arkiserver:8090/dataset/meteonetwork
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[opendata-er]
 +
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
 +
filter = product: BUFR:t=spdsra or BUFR:t=locali or BUFR:t=agrmet or BUFR:t=profe or BUFR:t=simnpr or BUFR:t=simnbo or BUFR:t=rer or BUFR:t=simc or BUFR:t=urbane or BUFR:t=arpae or BUFR:t=boa or BUFR:t=cer or BUFR:t=provpc or BUFR:t=syrep or BUFR:t=umsuol
 +
index = reftime, area, product, origin, proddef
 +
name = opendata-er
 +
path = http://arkiserver:8090/dataset/opendata-er
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[opendata-aq-er]
 +
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
 +
filter = product: BUFR:t=arpae-aq
 +
index = reftime, area, product, origin, proddef
 +
name = opendata-aq-er
 +
path = http://arkiserver:8090/dataset/opendata-er
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[luftdaten]
 +
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
 +
filter = product: BUFR:t=luftdaten
 +
index = reftime, area, product, origin, proddef
 +
name = luftdaten
 +
path = http://arkiserver:8090/dataset/luftdaten
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[report_fixed]
 +
bounding = POLYGON ((11.2500000000000000 44.3458499999999987, 11.2939500000000006 44.5252300000000005, 11.5576200000000000 44.8620999999999981, 11.6186500000000006 44.8371899999999997, 11.6233599999999999 44.6534600000000026, 11.6230100000000007 44.6530500000000004, 11.2500000000000000 44.3458499999999987))
 +
filter = product: BUFR:t=rmap or BUFR:t=fixed
 +
index = reftime, area, product, origin, proddef
 +
name = report_fixed
 +
path = http://arkiserver:8090/dataset/report_fixed
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[report_mobile]
 +
filter = product: BUFR:t=rmap or BUFR:t=mobile
 +
index = reftime, area, product, origin, proddef
 +
name = report_mobile
 +
path = http://arkiserver:8090/dataset/report_mobile
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
 +
[sample_fixed]
 +
bounding = POLYGON ((0.0000000000000000 0.0000000000000000, 9.1569500000000001 45.4436499999999981, 9.1570599999999995 45.4440700000000035, 11.6006800000000005 46.3956500000000034,  11.6742399999999993 46.4202500000000029, 11.6745000000000001 46.4202900000000014, 11.6747899999999998 46.4201400000000035, 12.4200400000000002 44.1349099999999979, 12.4458099999999998  43.9353399999999965, 12.5000000000000000 41.8999999999999986, 0.0000000000000000 0.0000000000000000))
 +
filter = product: BUFR:t=rmap or BUFR:t=fixed or BUFR:t=arpae
 +
index = reftime, area, product, origin, proddef
 +
name = sample_fixed
 +
path = http://arkiserver:8090/dataset/sample_fixed
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[sample_mobile]
 +
filter = product: BUFR:t=rmap or BUFR:t=mobile or BUFR:t=arpae
 +
index = reftime, area, product, origin, proddef
 +
name = sample_mobile
 +
path = http://arkiserver:8090/dataset/sample_mobile
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 
= Installazione RMAP server su centos 7 =
 
= Installazione RMAP server su centos 7 =
  
 
== istallazione sistema operativo ==
 
== istallazione sistema operativo ==
−
TBD
+
 
 +
useradd rmap
 +
 
 +
add epel repository
 +
 
 +
cd /etc/yum.repos.d
 +
wget http://rmap.it/repo/rmap/rmapcentos.repo
 +
 
 +
yum install yum-plugin-copr
 +
yum copr enable simc/stable
 +
 
 +
#cd /tmp
 +
#wget http://rmap.it/repo/rmap/yum-packages-centos.list
 +
#yum -y install < yum-packages-centos.list
 +
 +
yum groupinstall rmap
 +
 
  
 
/etc/selinux/config
 
/etc/selinux/config
Riga 15: Riga 666:
 
  mkdir /rmap
 
  mkdir /rmap
 
  chmod go+rx /rmap
 
  chmod go+rx /rmap
 +
 +
/etc/sysconfig/crond
 +
CRONDARGS=-s -m off
 +
 +
mkdir /var/log/rmap
 +
chown -R rmap:rmap /var/log/rmap
  
 
== postgresql ==
 
== postgresql ==
Riga 92: Riga 749:
 
== apache ==
 
== apache ==
  
−
  yum install mod_wsgi-4.4.21-1.el7.centos.x86_64.rpm
+
  yum install python34-mod_wsgi
  
 
  useradd -r rmap
 
  useradd -r rmap
Riga 136: Riga 793:
 
     Include conf.d/rmap.inc
 
     Include conf.d/rmap.inc
 
  </VirtualHost>
 
  </VirtualHost>
 +
 +
/etc/httpd/conf.d/rmap.inc
 +
 +
Alias /download /var/www/html/download
 +
Alias /repo    /var/www/html/repo
 +
Alias /showroom /var/www/html/showroom
 +
Alias /arkiweb  /var/www/html/arkiweb
 +
 +
#Alias /static/admin /usr/lib/python2.7/site-packages/django/contrib/admin/static/admin
 +
#<Directory "/usr/lib/python2.7/site-packages/django/contrib/admin/static/admin">
 +
#     Require all granted
 +
#</Directory>
 +
 +
Alias /static  /usr/share/rmap/static
 +
<Directory /usr/share/rmap/static>
 +
        Require all granted
 +
        SetHandler None
 +
</Directory>
 +
 +
Alias /media /usr/share/rmap/media
 +
<Directory /usr/share/rmap/media>
 +
        Require all granted
 +
        SetHandler None
 +
</Directory>
 +
 +
WSGIScriptAlias / /usr/bin/rmap.wsgi
 +
#WSGIImportScript /usr/bin/rmap.wsgi process-group=%{GLOBAL} application-group=%{GLOBAL}
 +
#WSGIPythonPath /path/to/mysite.com
 +
 +
#WSGIDaemonProcess rmap processes=5 threads=5
 +
#WSGIDaemonProcess rmap
 +
#WSGIProcessGroup rmap
 +
 +
<Directory /usr/bin>
 +
<Files rmap.wsgi>
 +
Require all granted
 +
</Files>
 +
</Directory>
 +
 +
<Location /auth>
 +
    Order Deny,Allow
 +
    Deny from all
 +
    Allow from 127.0.0.1
 +
</Location>
  
  
 
  chkconfig httpd on
 
  chkconfig httpd on
 
  service httpd start
 
  service httpd start
−
 
  
 
== Arkimet ==
 
== Arkimet ==
  
 
  useradd  -r arkimet
 
  useradd  -r arkimet
 +
mkdir /home/arkimet
 +
chown arkimet:arkimet /home/arkimet
 
  mkdir /rmap/arkimet/
 
  mkdir /rmap/arkimet/
 
  chown -R arkimet:arkimet /rmap/arkimet/
 
  chown -R arkimet:arkimet /rmap/arkimet/
Riga 151: Riga 853:
 
  DATASET_CONFIG="/rmap/arkimet/arkimet.conf"
 
  DATASET_CONFIG="/rmap/arkimet/arkimet.conf"
  
 +
ATTENZIONE ATTENZIONE questa ultima modifica si perde con un aggiornamento del pacchetto
  
 
add in /etc/arkimet/scan-bufr/generic.lua
 
add in /etc/arkimet/scan-bufr/generic.lua
−
     if report == "mobile"
+
    local area = nil
 +
     if report:enqc() == "mobile"
 
     then
 
     then
 
         area = bufr_read_area_mobile(msg)
 
         area = bufr_read_area_mobile(msg)
 +
    else
 +
        area = bufr_read_area_fixed(msg)
 
     end
 
     end
  
 +
ATTENZIONE ATTENZIONE: questa ultima modifica è da fare a ogni aggiornamento del pacchetto
 +
 +
systemctl daemon-reload
 
  chkconfig arkimet on
 
  chkconfig arkimet on
 
  service arkimet start
 
  service arkimet start
Riga 192: Riga 901:
 
== Mosquitto ==
 
== Mosquitto ==
  
−
  yum install mosquitto
+
add
 +
exclude=mosquitto
 +
in
 +
/etc/yum.repos.d/epel.repo
 +
 
 +
wget "http://download.opensuse.org/repositories/home:/oojah:/mqtt/CentOS_CentOS-7/home:oojah:mqtt.repo" -o /etc/yum.repos.d/mqtt.repo
 +
  yum install mosquitto libmosquitto-devel libmosquittopp-devel mosquitto-clients
 
  mkdir git
 
  mkdir git
 
  cd git
 
  cd git
Riga 198: Riga 913:
 
  cp  config.mk.in  config.mk
 
  cp  config.mk.in  config.mk
 
  emacs config.mk  (disable mysql; enable http)   
 
  emacs config.mk  (disable mysql; enable http)   
 +
 +
apply this patch:
 +
<nowiki>
 +
diff --git a/auth-plug.c b/auth-plug.c
 +
index 744f115..a36c039 100644
 +
--- a/auth-plug.c
 +
+++ b/auth-plug.c
 +
@@ -585,6 +585,7 @@ int mosquitto_auth_acl_check(void *userdata, const char *clientid, const char *u
 +
        * id to bypass ACL checks (or have a username/client id that cannot
 +
        * publish or receive messages to its own place in the hierarchy).
 +
        */
 +
+      /*
 +
        if(username && strpbrk(username, "+#/")){
 +
                _log(MOSQ_LOG_NOTICE, "ACL denying access to client with dangerous username \"%s\"", username);
 +
                return MOSQ_DENY_ACL;
 +
@@ -594,6 +595,7 @@ int mosquitto_auth_acl_check(void *userdata, const char *clientid, const char *u
 +
                _log(MOSQ_LOG_NOTICE, "ACL denying access to client with dangerous client id \"%s\"", clientid);
 +
                return MOSQ_DENY_ACL;
 +
        }
 +
+      */
 +
 +
        _log(LOG_DEBUG, "mosquitto_auth_acl_check(..., %s, %s, %s, %s)",
 +
                clientid ? clientid : "NULL",
 +
</nowiki>
 +
 
  make
 
  make
 
  cp auth-plug.so /usr/lib64/
 
  cp auth-plug.so /usr/lib64/
Riga 219: Riga 959:
 
  auth_opt_http_superuser_uri /auth/superuser
 
  auth_opt_http_superuser_uri /auth/superuser
 
  auth_opt_http_aclcheck_uri /auth/acl
 
  auth_opt_http_aclcheck_uri /auth/acl
−
 
−
pid_file /var/run/mosquitto.pid
 
−
 
 
  persistence true
 
  persistence true
 
  persistence_location /rmap/mosquitto/
 
  persistence_location /rmap/mosquitto/
−
 
−
 
  
 
/etc/mosquitto/aclfile
 
/etc/mosquitto/aclfile
Riga 247: Riga 982:
 
  pattern write rpc/%u/#
 
  pattern write rpc/%u/#
  
−
add in /etc/mosquitto/mosquitto.conf
+
remove everythings and add in /etc/mosquitto/mosquitto.conf
 
  include_dir /etc/mosquitto/conf.d
 
  include_dir /etc/mosquitto/conf.d
 +
pid_file /var/run/mosquitto.pid
 +
 +
 +
touch /etc/mosquitto/pwfile
  
 
  chkconfig mosquitto on
 
  chkconfig mosquitto on
 
  service mosquitto start
 
  service mosquitto start
 +
 +
if the package use systemd:
 +
create /etc/systemd/system/mosquitto.service.d/rmap.conf
 +
[Service]
 +
Restart=always
 +
RestartSec=15
 +
 +
if the package use systemV:
 +
/etc/monit.d/mosquitto
 +
 +
check process mosquitto with pidfile /var/run/mosquitto.pid
 +
    start program = "/etc/init.d/mosquitto restart"
 +
    stop program = "/etc/init.d/mosquitto stop"
 +
    if failed host localhost port 1883 timeout 30 seconds retry 3 then restart
  
 
== Rabbitmq ==
 
== Rabbitmq ==
Riga 284: Riga 1 037:
 
  rabbitmq-plugins enable rabbitmq_shovel
 
  rabbitmq-plugins enable rabbitmq_shovel
 
  rabbitmq-plugins enable rabbitmq_shovel_management
 
  rabbitmq-plugins enable rabbitmq_shovel_management
−
 
−
forse:
 
−
chown rabbitmq:rabbitmq /var/lib/rabbitmq/.erlang.cookie
 
−
chmod 600 /var/lib/rabbitmq/.erlang.cookie
 
  
 
  chkconfig rabbitmq-server on
 
  chkconfig rabbitmq-server on
Riga 296: Riga 1 045:
 
on overview page use import definition to configure exchange, queue and users
 
on overview page use import definition to configure exchange, queue and users
 
with the same management interface remove "guest" user and login with a new real user
 
with the same management interface remove "guest" user and login with a new real user
 +
 +
Per attivare uno showell:
 +
rabbitmqctl set_parameter shovel report_mobile '{"src-protocol": "amqp091", "src-uri": "amqp://rmap:<password>@rmap.cc", "src-queue": "report_mobile_saved",
 +
"dest-protocol": "amqp091", "dest-uri": "amqp://rmap:<password>@", "dest-queue": "report_mobile"}'
 +
 +
problema non risolto:
 +
se si trasferiscono dati scritti da un utente autenticandosi con un altro utente la security su user_id lo vieta.
 +
https://www.rabbitmq.com/shovel-dynamic.html
 +
bisognerebbe riuscire a settare "user_id" tramite il parametro "dest-publish-properties" nel formato json sopra ma non funziona
  
 
== Monit ==
 
== Monit ==
Riga 311: Riga 1 069:
  
 
  rm /etc/monit.d/logging
 
  rm /etc/monit.d/logging
−
 
−
/etc/monit.d/mosquitto
 
−
check process mosquitto with pidfile /var/run/mosquitto.pid
 
−
 
−
    start program = "/etc/init.d/mosquitto restart"
 
−
    stop program = "/etc/init.d/mosquitto stop"
 
−
    if failed host localhost port 1883 timeout 30 seconds retry 3 then restart
 
  
 
  wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/monit.d/rmap
 
  wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/monit.d/rmap
Riga 323: Riga 1 074:
 
  chkconfig monit on
 
  chkconfig monit on
 
  service monit start
 
  service monit start
 +
 +
== Cron ==
 +
 +
cd /etc/cron.d
 +
https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/arpae_aq_ckan
 +
https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/dballe2arkimet
 +
https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/luftdatem
 +
https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/rmap_generate_summary_cache
 +
 +
== Arkiweb ==
 +
yum install arkimet arkiweb
 +
 +
/etc/httpd/conf.d/arkiweb.conf
 +
 +
ScriptAlias /services/arkiweb/ /usr/lib64/arkiweb/
 +
Alias /arkiweb  /var/www/html/arkiweb
 +
 +
<Directory "/usr/lib64/arkiweb">
 +
        AllowOverride None
 +
        Options +ExecCGI
 +
 +
        Order allow,deny
 +
        Allow from all
 +
 +
        # ARKIWEB_CONFIG is mandatory!
 +
        SetEnv ARKIWEB_CONFIG /rmap/arkimet/arkiweb.config
 +
       
 +
 +
        Require all granted
 +
 +
        # Authentication (optional)
 +
        #
 +
        # Basic authentication example:
 +
        # SetEnv ARKIWEB_RESTRICT REMOTE_USER
 +
        # AuthType Basic
 +
        # AuthUserFile /etc/arkiweb.passwords
 +
        # require valid-user
 +
</Directory>
 +
 +
Alias /arkiwebjs/ /usr/share/arkiweb/public/
 +
<Directory "/usr/share/arkiweb/public">
 +
          #Require all granted
 +
          AllowOverride None
 +
 +
          Order allow,deny
 +
          Allow from all
 +
 +
          Require all granted
 +
 +
</Directory>
 +
 +
mkdir /var/www/html/arkiweb/
 +
cp /usr/share/doc/arkiweb/html/example/index.html /var/www/html/arkiweb/index.html
 +
 +
/rmap/arkimet/arkiweb.config
 +
 +
[arpav]
 +
bounding = POLYGON ((12.3693200000000001 44.9166299999999978, 11.3025699999999993 45.0306599999999975, 11.0090299999999992 45.2172600000000031, 10.8328900000000008 45.3717499999999987, 10.7659300000000009 45.5176999999999978, 11.8763699999999996 46.4992599999999996, 12.4241600000000005 46.6514799999999994, 12.7082800000000002 46.5699699999999979, 13.0772700000000004 45.6406399999999977, 12.3693200000000001 44.9166299999999978))
 +
filter = product: BUFR:t=arpav
 +
index = reftime, area, product, origin, proddef
 +
name = arpav
 +
path = http://arkiserver:8090/dataset/arpav
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[meteonetwork]
 +
bounding = POLYGON ((12.0994399999999995 43.7931499999999971, 9.8880599999999994 44.5129299999999972, 9.4983599999999999 44.6443500000000029, 9.4705399999999997 44.6982100000000031, 9.4444999999999997 44.9392799999999966, 9.4909800000000004 45.0587200000000010, 11.8647899999999993 46.5125900000000030, 12.1300000000000008 46.5499999999999972, 12.9021600000000003 45.6111099999999965, 12.7495600000000007 43.9628200000000007, 12.6686999999999994 43.8718500000000020, 12.6577099999999998 43.8649699999999996, 12.0994399999999995 43.7931499999999971))
 +
filter = product: BUFR:t=mnw
 +
index = reftime, area, product, origin, proddef
 +
name = meteonetwork
 +
path = http://arkiserver:8090/dataset/meteonetwork
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[opendata-er]
 +
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
 +
filter = product: BUFR:t=spdsra or BUFR:t=locali or BUFR:t=agrmet or BUFR:t=profe or BUFR:t=simnpr or BUFR:t=simnbo or BUFR:t=rer or BUFR:t=simc or BUFR:t=urbane or BUFR:t=arpae or BUFR:t=boa or BUFR:t=cer or BUFR:t=provpc or BUFR:t=syrep or BUFR:t=umsuol
 +
index = reftime, area, product, origin, proddef
 +
name = opendata-er
 +
path = http://arkiserver:8090/dataset/opendata-er
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[opendata-aq-er]
 +
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
 +
filter = product: BUFR:t=arpae-aq
 +
index = reftime, area, product, origin, proddef
 +
name = opendata-aq-er
 +
path = http://arkiserver:8090/dataset/opendata-er
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[luftdaten]
 +
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
 +
filter = product: BUFR:t=luftdaten
 +
index = reftime, area, product, origin, proddef
 +
name = luftdaten
 +
path = http://arkiserver:8090/dataset/luftdaten
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[report_fixed]
 +
bounding = POLYGON ((11.2500000000000000 44.3458499999999987, 11.2939500000000006 44.5252300000000005, 11.5576200000000000 44.8620999999999981, 11.6186500000000006 44.8371899999999997, 11.6233599999999999 44.6534600000000026, 11.6230100000000007 44.6530500000000004, 11.2500000000000000 44.3458499999999987))
 +
filter = product: BUFR:t=rmap or BUFR:t=fixed
 +
index = reftime, area, product, origin, proddef
 +
name = report_fixed
 +
path = http://arkiserver:8090/dataset/report_fixed
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[report_mobile]
 +
filter = product: BUFR:t=rmap or BUFR:t=mobile
 +
index = reftime, area, product, origin, proddef
 +
name = report_mobile
 +
path = http://arkiserver:8090/dataset/report_mobile
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
 +
[sample_fixed]
 +
bounding = POLYGON ((0.0000000000000000 0.0000000000000000, 9.1569500000000001 45.4436499999999981, 9.1570599999999995 45.4440700000000035, 11.6006800000000005 46.3956500000000034,  11.6742399999999993 46.4202500000000029, 11.6745000000000001 46.4202900000000014, 11.6747899999999998 46.4201400000000035, 12.4200400000000002 44.1349099999999979, 12.4458099999999998  43.9353399999999965, 12.5000000000000000 41.8999999999999986, 0.0000000000000000 0.0000000000000000))
 +
filter = product: BUFR:t=rmap or BUFR:t=fixed or BUFR:t=arpae
 +
index = reftime, area, product, origin, proddef
 +
name = sample_fixed
 +
path = http://arkiserver:8090/dataset/sample_fixed
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef
 +
 +
[sample_mobile]
 +
filter = product: BUFR:t=rmap or BUFR:t=mobile or BUFR:t=arpae
 +
index = reftime, area, product, origin, proddef
 +
name = sample_mobile
 +
path = http://arkiserver:8090/dataset/sample_mobile
 +
postprocess = json, bufr, bufr-filter
 +
replace = yes
 +
server = http://arkiserver:8090
 +
step = daily
 +
type = remote
 +
unique = reftime, area, product, origin, proddef

Versione attuale delle 08:38, 13 lug 2020

Installazione RMAP server su centos 8

istallazione sistema operativo

dnf -y install epel-release
dnf install yum-plugin-copr
dnf copr enable simc/stable
dnf copr enable pat1/rmap
dnf config-manager --set-enabled PowerTool
dnf groupinstall rmap
dnf install mosquitto mosquitto-auth-plug
dnf install arkimet

useradd rmap


/etc/selinux/config 

SELINUX=disabled

/etc/tmpfiles.d/rmap.conf 

d /run/wsgirmap 0755 rmap rmap -
d /var/run/rmap 0755 rmap rmap -
d /var/run/httpd 0755 rmap rmap -

mkdir /rmap
chmod go+rx /rmap

/etc/sysconfig/crond 

CRONDARGS=-s -m off

mkdir /var/log/rmap
chown -R rmap:rmap /var/log/rmap

postgresql

dnf module disable postgresql:10 dnf module enable postgresql:12 dnf install postgresql-server postgresql-contrib dnf install python3-psycopg2

postgresql-setup --initdb --unit postgresql


/var/lib/pgsql/data/pg_hba.conf 

# TYPE  DATABASE        USER            ADDRESS                 METHOD                                                                

# "local" is for Unix domain socket connections only                                                                                  
# allow postgres user to use "ident" authentication on Unix sockets                                                                   
local   all             postgres                                ident
# allow all other users to use "md5" authentication on Unix sockets                                                                   
local   all             all                                     md5
# IPv4 local connections:                                                                                                             
host    all             all             127.0.0.1/32            md5
# IPv6 local connections:                                                                                                             
host    all             all             ::1/128                 md5


/var/lib/pgsql/data/postgresql.conf 

max_connections = 100
shared_buffers = 128MB
work_mem = 100MB
maintenance_work_mem = 200MB
effective_cache_size = 1GB



mkdir /etc/systemd/system/postgresql.service.d/

/etc/systemd/system/postgresql.service.d/rmap.conf 

[Service]

# Location of database directory
Environment=PGDATA=/rmap/pgsql/data

mkdir /rmap/pgsql/
chown postgres:postgres /rmap/pgsql/
mv /var/lib/pgsql/data /rmap/pgsql/

su - postgres
initdb
exit

systemctl enable postgresql.service
systemctl start postgresql.service

su - postgres
createuser -P -e rmapadmin
createdb --owner=rmapadmin rmapadmin
exit

/etc/rmap/rmap-site.cfg 

[database]
DATABASE_ENGINE = 'postgresql_psycopg2' # 'postgresql_psycopg2', 'postgresql', 'mysql', 'sqlite3' or 'ado_mssql'.                     
DATABASE_NAME = 'rmapadmin'             # Or path to database file if using sqlite3.                                                  
DATABASE_USER = 'rmapadmin'             # Not used with sqlite3.                                                                      
DATABASE_PASSWORD = 'rmapadmin'         # Not used with sqlite3.                                                                      
DATABASE_HOST = 'localhost'             # Set to empty string for localhost. Not used with sqlite3.                                   
DATABASE_PORT = '5432'                  # Set to empty string for default. Not used with sqlite3.                                     

rmapctrl --syncdb



su - postgres
createuser -P -e rmap
createdb --owner=rmap report_fixed
createdb --owner=rmap report_mobile
createdb --owner=rmap sample_fixed
createdb --owner=rmap sample_mobile



exit

apache

Collect static files from django apps: 

mkdir global_static
export DJANGO_SETTINGS_MODULE=rmap.settings
django-admin collectstatic
rmdir global_static

yum install python3-mod_wsgi

useradd -r rmap
mkdir /home/rmap
chown rmap:rmap /home/rmap

mkdir /rmap/cache
chown rmap:rmap /rmap/cache

/etc/httpd/conf.modules.d/00-mpm.conf 

LoadModule mpm_worker_module modules/mod_mpm_worker.so

<IfModule mpm_worker_module>
#StartServers          2
#MaxClients          150
#MinSpareThreads      25
#MaxSpareThreads      75
#ThreadsPerChild      25
#MaxRequestsPerChild   0
ServerLimit         16
StartServers         2
MaxRequestWorkers  150
MinSpareThreads     10
MaxSpareThreads     35
ThreadsPerChild     15
MaxRequestWorkers      240
MaxConnectionsPerChild 10000
</IfModule>


/etc/httpd/conf.d/rmap.conf 

ServerName rmap.it

WSGISocketPrefix /run/wsgirmap/rmap
WSGIDaemonProcess www.rmap.cc user=rmap group=rmap maximum-requests=100 graceful-timeout=200 processes=10 threads=5 request-timeout=180 socket-timeout=180 header-buffer-  size=65000
WSGIProcessGroup www.rmap.cc
WSGIApplicationGroup %{GLOBAL}


<VirtualHost *:80 >
   ServerName rmap.it
   ServerAlias rmap.cc rmapv.rmap.cc rmapv.rmap.it www.rmap.cc www.rmapv.rmap.cc www.rmap.it www.rmapv.rmap.it localhost localhost.localdomain 127.0.0.1 partecipa.rainbolife.eu
   Include conf.d/rmap.inc
</VirtualHost>

/etc/httpd/conf.d/rmap.inc 

Alias /download /var/www/html/download
Alias /repo     /var/www/html/repo
Alias /showroom /var/www/html/showroom
Alias /arkiweb  /var/www/html/arkiweb

#Alias /static/admin /usr/lib/python2.7/site-packages/django/contrib/admin/static/admin
#<Directory "/usr/lib/python2.7/site-packages/django/contrib/admin/static/admin">
#	    Require all granted
#</Directory>

Alias /static   /usr/share/rmap/static
<Directory /usr/share/rmap/static>
       Require all granted
       SetHandler None
</Directory>

Alias /media /usr/share/rmap/media
<Directory /usr/share/rmap/media>
       Require all granted
       SetHandler None
</Directory>

WSGIScriptAlias / /usr/bin/rmap.wsgi
#WSGIImportScript /usr/bin/rmap.wsgi process-group=%{GLOBAL} application-group=%{GLOBAL}
#WSGIPythonPath /path/to/mysite.com

#WSGIDaemonProcess rmap processes=5 threads=5
#WSGIDaemonProcess rmap
#WSGIProcessGroup rmap

<Directory /usr/bin>
<Files rmap.wsgi>
Require all granted
</Files>
</Directory>

<Location /auth>
   Order Deny,Allow
   Deny from all
   Allow from 127.0.0.1
</Location>

SecRuleEngine On

#The first SecAction initializes the state, in this case by IP address.
#The second SecAction deprecates the counter by 1 every 60 second.
#This is setting the base rate of our rate limit
#Then the Header definition ensures a header is set whenever a request
#is rate limited, giving a hint to the client that they shouldn’t try
#again for 10 seconds. This is obviously just a guide and a lot of
#clients don’t implement it (and it’s really only valid on a 503 status
#anyway) so it’s a little bit of wishful thinking really.
#Then we define a neat ErrorDocument for the 509 response to give a better clue to the client about what is happening.


<Location /borinud>

  # whitelist localhost
  #SecRule REMOTE_ADDR "@contains 127.0.0.1" "id:1,phase:1,nolog,allow,ctl:ruleEngine=Off"
  SecRule REMOTE_ADDR "^127.0.0.1$" nolog,allow,id:1

  # initialise the state based on ip address
  SecAction id:2,initcol:IP=%{REMOTE_ADDR}

  # set the base rate to one per 15 minutes
  SecAction id:3,deprecatevar:IP.CALLS_LIMIT=1/900

  # if greater then burst_rate_limit then pause set RATELIMITED var and then return 503
  SecRule IP:CALLS_LIMIT "@gt 60" "id:4,phase:2,pause:300,deny,status:503,setenv:RATELIMITED,skip:1"

  # if above rule doesnt match increment the count
  SecAction id:5,setvar:IP.CALLS_LIMIT=+1

  # set a header when ratelimited
  Header always set Retry-After "10" env=RATELIMITED

</Location>

ErrorDocument 503 "Service Unavailable"



chkconfig httpd on
service httpd start

Arkimet

dnf install arkimet arkimet-postprocessor-suite
useradd  -r arkimet
mkdir /home/arkimet
chown arkimet:arkimet /home/arkimet
mkdir /rmap/arkimet/
chown -R arkimet:arkimet /rmap/arkimet/
mkdir /var/log/arkimet
chown -R arkimet:arkimet /var/log/arkimet


/etc/sysconfig/arkimet 

DATASET_CONFIG="/rmap/arkimet/arkimet.conf"


Create file /etc/arkimet/scan/bufr_generic_mobile_rmap.py: 

from arkimet.scan.bufr import Scanner, read_area_mobile, read_proddef


def scan(msg, md):
   if msg.report == "mobile":
       area = read_area_mobile(msg)
       proddef = read_proddef(msg)
       if area:
           md["area"] = {"style": "GRIB", "value": area}
       if proddef:
           md["proddef"] = {"style": "GRIB", "value": proddef}
   else:
       return False


Scanner.register("generic", scan, priority=1)



systemctl daemon-reload
chkconfig arkimet on
service arkimet start

Sincronizzazione DB

Server di origine

rmapctrl --dumpdata > dumpdata.json

rimuovere le prime righe che non sono json 

dbadb export --dsn="mysql:///report_fixed?user=rmap&password=****" > report_fixed.bufr
dbadb export --dsn="mysql:///report_mobile?user=rmap&password=****" > report_mobile.bufr
dbadb export --dsn="mysql:///sample_fixed?user=rmap&password=****" > sample_fixed.bufr
dbadb export --dsn="mysql:///sample_mobile?user=rmap&password=****" > sample_mobile.bufr


Server di destinazione

Da interfaccia web admin rimuovere TUTTI gli utenti (compreso rmap) 

rmapctrl --loaddata=dumpdata.json



dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/report_fixed" report_fixed.bufr
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/report_mobile" report_mobile.bufr
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/sample_mobile" sample_mobile.bufr
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/sample_fixed" sample_fixed.bufr

cd /usr/share/rmap/
rsync -av utente@serverorigine:/usr/share/rmap/media .

Mosquitto

mkdir /etc/mosquitto/conf.d
mkdir /rmap/mosquitto
chown mosquitto:mosquitto /rmap/mosquitto

/etc/mosquitto/conf.d/rmap.conf 

persistent_client_expiration 1d
allow_anonymous true
password_file /etc/mosquitto/pwfile
acl_file /etc/mosquitto/aclfile
log_type error
log_type warning
auth_plugin /usr/lib64/auth-plug.so
auth_opt_backends http
auth_opt_http_hostname localhost
auth_opt_http_ip 127.0.0.1
auth_opt_http_port 80
auth_opt_http_getuser_uri /auth/auth
auth_opt_http_superuser_uri /auth/superuser
auth_opt_http_aclcheck_uri /auth/acl
persistence true
persistence_location /rmap/mosquitto/

/etc/mosquitto/aclfile 

topic read #
topic write test/#

# This only affects clients with username "rmap".
user rmap
topic #
 
pattern write rmap/%u/#
pattern write sample/%u/#

pattern write report/%u/#
pattern write fixed/%u/#

pattern write mobile/%u/#

pattern write maint/%u/#

pattern write rpc/%u/#

remove everythings and add in /etc/mosquitto/mosquitto.conf 

include_dir /etc/mosquitto/conf.d
pid_file /var/run/mosquitto.pid



touch /etc/mosquitto/pwfile

chkconfig mosquitto on
service mosquitto start

if the package use systemd: create /etc/systemd/system/mosquitto.service.d/rmap.conf 

[Service] 
Restart=always 
RestartSec=15

if the package use systemV: /etc/monit.d/mosquitto 

check process mosquitto with pidfile /var/run/mosquitto.pid
   start program = "/etc/init.d/mosquitto restart"
   stop program = "/etc/init.d/mosquitto stop"
   if failed host localhost port 1883 timeout 30 seconds retry 3 then restart

Rabbitmq

curl -s https://packagecloud.io/install/repositories/rabbitmq/rabbitmq-server/script.rpm.sh |bash
curl -s https://packagecloud.io/install/repositories/rabbitmq/erlang/script.rpm.sh | sudo bash

dnf install rabbitmq-server


in /etc/rabbitmq/rabbitmq.config 

[
  {rabbit, 
    [
      {auth_backends, [rabbit_auth_backend_internal, rabbit_auth_backend_http]},
      {loopback_users, []}
    ]
  },
  {rabbitmq_auth_backend_http,
    [{user_path,     "http://localhost/auth/user"},
      {vhost_path,    "http://localhost/auth/vhost"},
      {resource_path, "http://localhost/auth/resource"}
    ]
  }
].



rabbitmq-plugins enable rabbitmq_auth_backend_http
rabbitmq-plugins enable rabbitmq_management
#rabbitmq-plugins enable rabbitmq_management_visualiser
rabbitmq-plugins enable rabbitmq_shovel
rabbitmq-plugins enable rabbitmq_shovel_management

chkconfig rabbitmq-server on
service rabbitmq-server start


login at management interface with user "guest" and password "guest" on overview page use import definition to configure exchange, queue and users with the same management interface remove "guest" user and login with a new real user

Per attivare uno showell: 

rabbitmqctl set_parameter shovel report_mobile '{"src-protocol": "amqp091", "src-uri": "amqp://rmap:<password>@rmap.cc", "src-queue": "report_mobile_saved", 
"dest-protocol": "amqp091", "dest-uri": "amqp://rmap:<password>@", "dest-queue": "report_mobile"}'

problema non risolto: se si trasferiscono dati scritti da un utente autenticandosi con un altro utente la security su user_id lo vieta. https://www.rabbitmq.com/shovel-dynamic.html bisognerebbe riuscire a settare "user_id" tramite il parametro "dest-publish-properties" nel formato json sopra ma non funziona

Monit

yum install monit

comment everithings and add in /etc/monitrc 

set daemon  60              # check services at 1-minute intervals
set log syslog
set httpd port 5925 and
   allow rmap:<password>        # require user 'admin' with password 'monit'
   allow @monit           # allow users of group 'monit' to connect (rw)
   allow @users readonly  # allow users of group 'users' to connect readonly
include /etc/monit.d/*



cd /etc/monit.d/
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/monit.d/rmap

chkconfig monit on
service monit start

Cron

cd /etc/cron.d
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/arpae_aq_ckan
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/dballe2arkimet
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/luftdaten
wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/rmap_generate_summary_cache

Arkiweb

AL MOMENTO NON DISPONIBILE SU CENTOS 8 NOT AVAILABLE ON CENTOS 8 

dnf install arkiweb

/etc/httpd/conf.d/arkiweb.conf 

ScriptAlias /services/arkiweb/ /usr/lib64/arkiweb/
Alias /arkiweb  /var/www/html/arkiweb

<Directory "/usr/lib64/arkiweb">
       AllowOverride None
       Options +ExecCGI

       Order allow,deny
       Allow from all

       # ARKIWEB_CONFIG is mandatory!
       SetEnv ARKIWEB_CONFIG /rmap/arkimet/arkiweb.config
       

       Require all granted

       # Authentication (optional)
       #
       # Basic authentication example:
       # SetEnv ARKIWEB_RESTRICT REMOTE_USER
       # AuthType Basic
       # AuthUserFile /etc/arkiweb.passwords
       # require valid-user
</Directory>

Alias /arkiwebjs/ /usr/share/arkiweb/public/
<Directory "/usr/share/arkiweb/public">
          #Require all granted
          AllowOverride None

          Order allow,deny
          Allow from all

          Require all granted

</Directory>

mkdir /var/www/html/arkiweb/
cp /usr/share/doc/arkiweb/html/example/index.html /var/www/html/arkiweb/index.html

/rmap/arkimet/arkiweb.config 

[arpav]
bounding = POLYGON ((12.3693200000000001 44.9166299999999978, 11.3025699999999993 45.0306599999999975, 11.0090299999999992 45.2172600000000031, 10.8328900000000008 45.3717499999999987, 10.7659300000000009 45.5176999999999978, 11.8763699999999996 46.4992599999999996, 12.4241600000000005 46.6514799999999994, 12.7082800000000002 46.5699699999999979, 13.0772700000000004 45.6406399999999977, 12.3693200000000001 44.9166299999999978))
filter = product: BUFR:t=arpav
index = reftime, area, product, origin, proddef
name = arpav
path = http://arkiserver:8090/dataset/arpav
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[meteonetwork]
bounding = POLYGON ((12.0994399999999995 43.7931499999999971, 9.8880599999999994 44.5129299999999972, 9.4983599999999999 44.6443500000000029, 9.4705399999999997 44.6982100000000031, 9.4444999999999997 44.9392799999999966, 9.4909800000000004 45.0587200000000010, 11.8647899999999993 46.5125900000000030, 12.1300000000000008 46.5499999999999972, 12.9021600000000003 45.6111099999999965, 12.7495600000000007 43.9628200000000007, 12.6686999999999994 43.8718500000000020, 12.6577099999999998 43.8649699999999996, 12.0994399999999995 43.7931499999999971))
filter = product: BUFR:t=mnw
index = reftime, area, product, origin, proddef
name = meteonetwork
path = http://arkiserver:8090/dataset/meteonetwork
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[opendata-er]
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
filter = product: BUFR:t=spdsra or BUFR:t=locali or BUFR:t=agrmet or BUFR:t=profe or BUFR:t=simnpr or BUFR:t=simnbo or BUFR:t=rer or BUFR:t=simc or BUFR:t=urbane or BUFR:t=arpae or BUFR:t=boa or BUFR:t=cer or BUFR:t=provpc or BUFR:t=syrep or BUFR:t=umsuol
index = reftime, area, product, origin, proddef
name = opendata-er
path = http://arkiserver:8090/dataset/opendata-er
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[opendata-aq-er]
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
filter = product: BUFR:t=arpae-aq
index = reftime, area, product, origin, proddef
name = opendata-aq-er
path = http://arkiserver:8090/dataset/opendata-er
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[luftdaten]
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
filter = product: BUFR:t=luftdaten
index = reftime, area, product, origin, proddef
name = luftdaten
path = http://arkiserver:8090/dataset/luftdaten
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[report_fixed]
bounding = POLYGON ((11.2500000000000000 44.3458499999999987, 11.2939500000000006 44.5252300000000005, 11.5576200000000000 44.8620999999999981, 11.6186500000000006 44.8371899999999997, 11.6233599999999999 44.6534600000000026, 11.6230100000000007 44.6530500000000004, 11.2500000000000000 44.3458499999999987))
filter = product: BUFR:t=rmap or BUFR:t=fixed
index = reftime, area, product, origin, proddef
name = report_fixed
path = http://arkiserver:8090/dataset/report_fixed
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[report_mobile]
filter = product: BUFR:t=rmap or BUFR:t=mobile
index = reftime, area, product, origin, proddef
name = report_mobile
path = http://arkiserver:8090/dataset/report_mobile
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef


[sample_fixed]
bounding = POLYGON ((0.0000000000000000 0.0000000000000000, 9.1569500000000001 45.4436499999999981, 9.1570599999999995 45.4440700000000035, 11.6006800000000005 46.3956500000000034,   11.6742399999999993 46.4202500000000029, 11.6745000000000001 46.4202900000000014, 11.6747899999999998 46.4201400000000035, 12.4200400000000002 44.1349099999999979, 12.4458099999999998  43.9353399999999965, 12.5000000000000000 41.8999999999999986, 0.0000000000000000 0.0000000000000000))
filter = product: BUFR:t=rmap or BUFR:t=fixed or BUFR:t=arpae
index = reftime, area, product, origin, proddef
name = sample_fixed
path = http://arkiserver:8090/dataset/sample_fixed
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[sample_mobile]
filter = product: BUFR:t=rmap or BUFR:t=mobile or BUFR:t=arpae
index = reftime, area, product, origin, proddef
name = sample_mobile
path = http://arkiserver:8090/dataset/sample_mobile
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

Installazione RMAP server su centos 7

istallazione sistema operativo

useradd rmap

add epel repository 

cd /etc/yum.repos.d
wget http://rmap.it/repo/rmap/rmapcentos.repo

yum install yum-plugin-copr
yum copr enable simc/stable

#cd /tmp
#wget http://rmap.it/repo/rmap/yum-packages-centos.list
#yum -y install < yum-packages-centos.list

yum groupinstall rmap


/etc/selinux/config 

SELINUX=disabled

/etc/tmpfiles.d/rmap.conf 

d /run/wsgirmap 0755 rmap rmap -
d /var/run/rmap 0755 rmap rmap -
d /var/run/httpd 0755 rmap rmap -

mkdir /rmap
chmod go+rx /rmap

/etc/sysconfig/crond 

CRONDARGS=-s -m off

mkdir /var/log/rmap
chown -R rmap:rmap /var/log/rmap

postgresql

yum install postgresql-server postgresql-contrib yum install python-psycopg2

/var/lib/pgsql/data/pg_hba.conf 

# TYPE  DATABASE        USER            ADDRESS                 METHOD                                                                

# "local" is for Unix domain socket connections only                                                                                  
# allow postgres user to use "ident" authentication on Unix sockets                                                                   
local   all             postgres                                ident
# allow all other users to use "md5" authentication on Unix sockets                                                                   
local   all             all                                     md5
# IPv4 local connections:                                                                                                             
host    all             all             127.0.0.1/32            md5
# IPv6 local connections:                                                                                                             
host    all             all             ::1/128                 md5


/var/lib/pgsql/data/postgresql.conf 

max_connections = 100
shared_buffers = 128MB
work_mem = 100MB
maintenance_work_mem = 200MB
effective_cache_size = 1GB



mkdir /etc/systemd/system/postgresql.service.d/

/etc/systemd/system/postgresql.service.d/rmap.conf 

[Service]

# Location of database directory
Environment=PGDATA=/rmap/pgsql/data

mkdir /rmap/pgsql/
chown postgres:postgres /rmap/pgsql/
mv /var/lib/pgsql/data /rmap/pgsql/

su - postgres
initdb
exit

systemctl enable postgresql.service
systemctl start postgresql.service

su - postgres
createuser -P -e rmapadmin
createdb --owner=rmapadmin rmapadmin
exit

/etc/rmap/rmap-site.cfg 

[database]
DATABASE_ENGINE = 'postgresql_psycopg2' # 'postgresql_psycopg2', 'postgresql', 'mysql', 'sqlite3' or 'ado_mssql'.                     
DATABASE_NAME = 'rmapadmin'             # Or path to database file if using sqlite3.                                                  
DATABASE_USER = 'rmapadmin'             # Not used with sqlite3.                                                                      
DATABASE_PASSWORD = 'rmapadmin'         # Not used with sqlite3.                                                                      
DATABASE_HOST = 'localhost'             # Set to empty string for localhost. Not used with sqlite3.                                   
DATABASE_PORT = '5432'                  # Set to empty string for default. Not used with sqlite3.                                     

rmapctrl --syncdb



su - postgres
createuser -P -e rmap
createdb --owner=rmap report_fixed
createdb --owner=rmap report_mobile
createdb --owner=rmap sample_fixed
createdb --owner=rmap sample_mobile



exit

apache

yum install python34-mod_wsgi

useradd -r rmap
mkdir /home/rmap
chown rmap:rmap /home/rmap

mkdir /rmap/cache
chown rmap:rmap /rmap/cache

/etc/httpd/conf.modules.d/00-mpm.conf 

LoadModule mpm_worker_module modules/mod_mpm_worker.so

<IfModule mpm_worker_module>
#StartServers          2
#MaxClients          150
#MinSpareThreads      25
#MaxSpareThreads      75
#ThreadsPerChild      25
#MaxRequestsPerChild   0
ServerLimit         16
StartServers         2
MaxRequestWorkers  150
MinSpareThreads     10
MaxSpareThreads     35
ThreadsPerChild     15
MaxRequestWorkers      240
MaxConnectionsPerChild 10000
</IfModule>


/etc/httpd/conf.d/rmap.conf 

ServerName rmap.it

WSGISocketPrefix /run/wsgirmap/rmap
WSGIDaemonProcess www.rmap.cc user=rmap group=rmap maximum-requests=100 graceful-timeout=200 processes=10 threads=5 request-timeout=180 socket-timeout=180 header-buffer-  size=65000
WSGIProcessGroup www.rmap.cc
WSGIApplicationGroup %{GLOBAL}


<VirtualHost *:80 >
   ServerName rmap.it
   ServerAlias rmap.cc rmapv.rmap.cc rmapv.rmap.it www.rmap.cc www.rmapv.rmap.cc www.rmap.it www.rmapv.rmap.it localhost localhost.localdomain 127.0.0.1 partecipa.rainbolife.eu
   Include conf.d/rmap.inc
</VirtualHost>

/etc/httpd/conf.d/rmap.inc 

Alias /download /var/www/html/download
Alias /repo     /var/www/html/repo
Alias /showroom /var/www/html/showroom
Alias /arkiweb  /var/www/html/arkiweb

#Alias /static/admin /usr/lib/python2.7/site-packages/django/contrib/admin/static/admin
#<Directory "/usr/lib/python2.7/site-packages/django/contrib/admin/static/admin">
#	    Require all granted
#</Directory>

Alias /static   /usr/share/rmap/static
<Directory /usr/share/rmap/static>
       Require all granted
       SetHandler None
</Directory>

Alias /media /usr/share/rmap/media
<Directory /usr/share/rmap/media>
       Require all granted
       SetHandler None
</Directory>

WSGIScriptAlias / /usr/bin/rmap.wsgi
#WSGIImportScript /usr/bin/rmap.wsgi process-group=%{GLOBAL} application-group=%{GLOBAL}
#WSGIPythonPath /path/to/mysite.com

#WSGIDaemonProcess rmap processes=5 threads=5
#WSGIDaemonProcess rmap
#WSGIProcessGroup rmap

<Directory /usr/bin>
<Files rmap.wsgi>
Require all granted
</Files>
</Directory>

<Location /auth>
   Order Deny,Allow
   Deny from all
   Allow from 127.0.0.1
</Location>



chkconfig httpd on
service httpd start

Arkimet

useradd  -r arkimet
mkdir /home/arkimet
chown arkimet:arkimet /home/arkimet
mkdir /rmap/arkimet/
chown -R arkimet:arkimet /rmap/arkimet/

/etc/sysconfig/arkimet 

DATASET_CONFIG="/rmap/arkimet/arkimet.conf"

ATTENZIONE ATTENZIONE questa ultima modifica si perde con un aggiornamento del pacchetto

add in /etc/arkimet/scan-bufr/generic.lua 

   local area = nil
   if report:enqc() == "mobile"
   then
       area = bufr_read_area_mobile(msg)
   else
       area = bufr_read_area_fixed(msg)
   end

ATTENZIONE ATTENZIONE: questa ultima modifica è da fare a ogni aggiornamento del pacchetto 

systemctl daemon-reload
chkconfig arkimet on
service arkimet start

Sincronizzazione DB

Server di origine

rmapctrl --dumpdata > dumpdata.json

rimuovere le prime righe che non sono json 

dbadb export --dsn="mysql:///report_fixed?user=rmap&password=****" > report_fixed.bufr
dbadb export --dsn="mysql:///report_mobile?user=rmap&password=****" > report_mobile.bufr
dbadb export --dsn="mysql:///sample_fixed?user=rmap&password=****" > sample_fixed.bufr
dbadb export --dsn="mysql:///sample_mobile?user=rmap&password=****" > sample_mobile.bufr


Server di destinazione

Da interfaccia web admin rimuovere TUTTI gli utenti (compreso rmap) 

rmapctrl --loaddata=dumpdata.json



dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/report_fixed" report_fixed.bufr
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/report_mobile" report_mobile.bufr
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/sample_mobile" sample_mobile.bufr
dbadb import --wipe-first --dsn="postgresql://rmap:***@localhost/sample_fixed" sample_fixed.bufr

cd /usr/share/rmap/
rsync -av utente@serverorigine:/usr/share/rmap/media .

Mosquitto

add 
exclude=mosquitto
in 
/etc/yum.repos.d/epel.repo

wget "http://download.opensuse.org/repositories/home:/oojah:/mqtt/CentOS_CentOS-7/home:oojah:mqtt.repo" -o /etc/yum.repos.d/mqtt.repo
yum install mosquitto libmosquitto-devel libmosquittopp-devel mosquitto-clients
mkdir git
cd git
git clone https://github.com/jpmens/mosquitto-auth-plug.git
cp  config.mk.in  config.mk
emacs config.mk  (disable mysql; enable http)

apply this patch: 

diff --git a/auth-plug.c b/auth-plug.c
index 744f115..a36c039 100644
--- a/auth-plug.c
+++ b/auth-plug.c
@@ -585,6 +585,7 @@ int mosquitto_auth_acl_check(void *userdata, const char *clientid, const char *u
         * id to bypass ACL checks (or have a username/client id that cannot
         * publish or receive messages to its own place in the hierarchy).
         */
+       /*
        if(username && strpbrk(username, "+#/")){
                _log(MOSQ_LOG_NOTICE, "ACL denying access to client with dangerous username \"%s\"", username);
                return MOSQ_DENY_ACL;
@@ -594,6 +595,7 @@ int mosquitto_auth_acl_check(void *userdata, const char *clientid, const char *u
                _log(MOSQ_LOG_NOTICE, "ACL denying access to client with dangerous client id \"%s\"", clientid);
                return MOSQ_DENY_ACL;
        }
+       */
 
        _log(LOG_DEBUG, "mosquitto_auth_acl_check(..., %s, %s, %s, %s)",
                clientid ? clientid : "NULL",


make
cp auth-plug.so /usr/lib64/
mkdir /etc/mosquitto/conf.d
mkdir /rmap/mosquitto
chown mosquitto:mosquitto /rmap/mosquitto

/etc/mosquitto/conf.d/rmap.conf 

persistent_client_expiration 1d
allow_anonymous true
password_file /etc/mosquitto/pwfile
acl_file /etc/mosquitto/aclfile
log_type error
log_type warning
auth_plugin /usr/lib64/auth-plug.so
auth_opt_backends http
auth_opt_http_hostname localhost
auth_opt_http_ip 127.0.0.1
auth_opt_http_port 80
auth_opt_http_getuser_uri /auth/auth
auth_opt_http_superuser_uri /auth/superuser
auth_opt_http_aclcheck_uri /auth/acl
persistence true
persistence_location /rmap/mosquitto/

/etc/mosquitto/aclfile 

topic read #
topic write test/#

# This only affects clients with username "rmap".
user rmap
topic #
 
pattern write rmap/%u/#
pattern write sample/%u/#

pattern write report/%u/#
pattern write fixed/%u/#

pattern write mobile/%u/#

pattern write maint/%u/#

pattern write rpc/%u/#

remove everythings and add in /etc/mosquitto/mosquitto.conf 

include_dir /etc/mosquitto/conf.d
pid_file /var/run/mosquitto.pid



touch /etc/mosquitto/pwfile

chkconfig mosquitto on
service mosquitto start

if the package use systemd: create /etc/systemd/system/mosquitto.service.d/rmap.conf 

[Service] 
Restart=always 
RestartSec=15

if the package use systemV: /etc/monit.d/mosquitto 

check process mosquitto with pidfile /var/run/mosquitto.pid
   start program = "/etc/init.d/mosquitto restart"
   stop program = "/etc/init.d/mosquitto stop"
   if failed host localhost port 1883 timeout 30 seconds retry 3 then restart

Rabbitmq

curl -s https://packagecloud.io/install/repositories/rabbitmq/rabbitmq-server/script.rpm.sh |bash
wget https://packages.erlang-solutions.com/erlang-solutions-1.0-1.noarch.rpm
rpm -Uvh erlang-solutions-1.0-1.noarch.rpm
yum install rabbitmq-server


in /etc/rabbitmq/rabbitmq.config 

[
  {rabbit, 
    [
      {auth_backends, [rabbit_auth_backend_internal, rabbit_auth_backend_http]},
      {loopback_users, []}
    ]
  },
  {rabbitmq_auth_backend_http,
    [{user_path,     "http://localhost/auth/user"},
      {vhost_path,    "http://localhost/auth/vhost"},
      {resource_path, "http://localhost/auth/resource"}
    ]
  }
].



rabbitmq-plugins enable rabbitmq_auth_backend_http
rabbitmq-plugins enable rabbitmq_management
rabbitmq-plugins enable rabbitmq_management_visualiser
rabbitmq-plugins enable rabbitmq_shovel
rabbitmq-plugins enable rabbitmq_shovel_management

chkconfig rabbitmq-server on
service rabbitmq-server start


login at management interface with user "guest" and password "guest" on overview page use import definition to configure exchange, queue and users with the same management interface remove "guest" user and login with a new real user

Per attivare uno showell: 

rabbitmqctl set_parameter shovel report_mobile '{"src-protocol": "amqp091", "src-uri": "amqp://rmap:<password>@rmap.cc", "src-queue": "report_mobile_saved", 
"dest-protocol": "amqp091", "dest-uri": "amqp://rmap:<password>@", "dest-queue": "report_mobile"}'

problema non risolto: se si trasferiscono dati scritti da un utente autenticandosi con un altro utente la security su user_id lo vieta. https://www.rabbitmq.com/shovel-dynamic.html bisognerebbe riuscire a settare "user_id" tramite il parametro "dest-publish-properties" nel formato json sopra ma non funziona

Monit

yum install monit

comment everithings and add in /etc/monitrc 

set daemon  60              # check services at 1-minute intervals
set log syslog
set httpd port 5925 and
   allow rmap:<password>        # require user 'admin' with password 'monit'
   allow @monit           # allow users of group 'monit' to connect (rw)
   allow @users readonly  # allow users of group 'users' to connect readonly
include /etc/monit.d/*

rm /etc/monit.d/logging

wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/monit.d/rmap

chkconfig monit on
service monit start

Cron

cd /etc/cron.d
https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/arpae_aq_ckan
https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/dballe2arkimet
https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/luftdatem
https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/rmap_generate_summary_cache

Arkiweb

yum install arkimet arkiweb

/etc/httpd/conf.d/arkiweb.conf 

ScriptAlias /services/arkiweb/ /usr/lib64/arkiweb/
Alias /arkiweb  /var/www/html/arkiweb

<Directory "/usr/lib64/arkiweb">
       AllowOverride None
       Options +ExecCGI

       Order allow,deny
       Allow from all

       # ARKIWEB_CONFIG is mandatory!
       SetEnv ARKIWEB_CONFIG /rmap/arkimet/arkiweb.config
       

       Require all granted

       # Authentication (optional)
       #
       # Basic authentication example:
       # SetEnv ARKIWEB_RESTRICT REMOTE_USER
       # AuthType Basic
       # AuthUserFile /etc/arkiweb.passwords
       # require valid-user
</Directory>

Alias /arkiwebjs/ /usr/share/arkiweb/public/
<Directory "/usr/share/arkiweb/public">
          #Require all granted
          AllowOverride None

          Order allow,deny
          Allow from all

          Require all granted

</Directory>

mkdir /var/www/html/arkiweb/
cp /usr/share/doc/arkiweb/html/example/index.html /var/www/html/arkiweb/index.html

/rmap/arkimet/arkiweb.config 

[arpav]
bounding = POLYGON ((12.3693200000000001 44.9166299999999978, 11.3025699999999993 45.0306599999999975, 11.0090299999999992 45.2172600000000031, 10.8328900000000008 45.3717499999999987, 10.7659300000000009 45.5176999999999978, 11.8763699999999996 46.4992599999999996, 12.4241600000000005 46.6514799999999994, 12.7082800000000002 46.5699699999999979, 13.0772700000000004 45.6406399999999977, 12.3693200000000001 44.9166299999999978))
filter = product: BUFR:t=arpav
index = reftime, area, product, origin, proddef
name = arpav
path = http://arkiserver:8090/dataset/arpav
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[meteonetwork]
bounding = POLYGON ((12.0994399999999995 43.7931499999999971, 9.8880599999999994 44.5129299999999972, 9.4983599999999999 44.6443500000000029, 9.4705399999999997 44.6982100000000031, 9.4444999999999997 44.9392799999999966, 9.4909800000000004 45.0587200000000010, 11.8647899999999993 46.5125900000000030, 12.1300000000000008 46.5499999999999972, 12.9021600000000003 45.6111099999999965, 12.7495600000000007 43.9628200000000007, 12.6686999999999994 43.8718500000000020, 12.6577099999999998 43.8649699999999996, 12.0994399999999995 43.7931499999999971))
filter = product: BUFR:t=mnw
index = reftime, area, product, origin, proddef
name = meteonetwork
path = http://arkiserver:8090/dataset/meteonetwork
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[opendata-er]
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
filter = product: BUFR:t=spdsra or BUFR:t=locali or BUFR:t=agrmet or BUFR:t=profe or BUFR:t=simnpr or BUFR:t=simnbo or BUFR:t=rer or BUFR:t=simc or BUFR:t=urbane or BUFR:t=arpae or BUFR:t=boa or BUFR:t=cer or BUFR:t=provpc or BUFR:t=syrep or BUFR:t=umsuol
index = reftime, area, product, origin, proddef
name = opendata-er
path = http://arkiserver:8090/dataset/opendata-er
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[opendata-aq-er]
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
filter = product: BUFR:t=arpae-aq
index = reftime, area, product, origin, proddef
name = opendata-aq-er
path = http://arkiserver:8090/dataset/opendata-er
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[luftdaten]
bounding = POLYGON ((1.1372199999999999 4.4391400000000001, 8.4514200000000006 44.2992399999999975, 9.2314900000000009 44.8656700000000015, 9.5297699999999992 45.0566800000000001, 9.7055399999999992 45.0605199999999968, 11.8957999999999995 44.9680000000000035, 12.1221499999999995 44.9429000000000016, 12.2213899999999995 44.8950600000000009, 12.7393999999999998 43.9584699999999984, 1.1372199999999999 4.4391400000000001))
filter = product: BUFR:t=luftdaten
index = reftime, area, product, origin, proddef
name = luftdaten
path = http://arkiserver:8090/dataset/luftdaten
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[report_fixed]
bounding = POLYGON ((11.2500000000000000 44.3458499999999987, 11.2939500000000006 44.5252300000000005, 11.5576200000000000 44.8620999999999981, 11.6186500000000006 44.8371899999999997, 11.6233599999999999 44.6534600000000026, 11.6230100000000007 44.6530500000000004, 11.2500000000000000 44.3458499999999987))
filter = product: BUFR:t=rmap or BUFR:t=fixed
index = reftime, area, product, origin, proddef
name = report_fixed
path = http://arkiserver:8090/dataset/report_fixed
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[report_mobile]
filter = product: BUFR:t=rmap or BUFR:t=mobile
index = reftime, area, product, origin, proddef
name = report_mobile
path = http://arkiserver:8090/dataset/report_mobile
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef


[sample_fixed]
bounding = POLYGON ((0.0000000000000000 0.0000000000000000, 9.1569500000000001 45.4436499999999981, 9.1570599999999995 45.4440700000000035, 11.6006800000000005 46.3956500000000034,   11.6742399999999993 46.4202500000000029, 11.6745000000000001 46.4202900000000014, 11.6747899999999998 46.4201400000000035, 12.4200400000000002 44.1349099999999979, 12.4458099999999998  43.9353399999999965, 12.5000000000000000 41.8999999999999986, 0.0000000000000000 0.0000000000000000))
filter = product: BUFR:t=rmap or BUFR:t=fixed or BUFR:t=arpae
index = reftime, area, product, origin, proddef
name = sample_fixed
path = http://arkiserver:8090/dataset/sample_fixed
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef

[sample_mobile]
filter = product: BUFR:t=rmap or BUFR:t=mobile or BUFR:t=arpae
index = reftime, area, product, origin, proddef
name = sample_mobile
path = http://arkiserver:8090/dataset/sample_mobile
postprocess = json, bufr, bufr-filter
replace = yes
server = http://arkiserver:8090
step = daily
type = remote
unique = reftime, area, product, origin, proddef
Estratto da "https://www.raspibo.org/wiki/index.php?title=Gruppo_Meteo/HowTo/server-centos&oldid=7281"