Differenze tra le versioni di "A Fridge Magnet"

Da raspibo.
Jump to navigation Jump to search
Riga 21: Riga 21:
 
* pin stripes, copper wire, ...
 
* pin stripes, copper wire, ...
 
* patience (unvaluable)
 
* patience (unvaluable)
 +
 +
[[File:fridge2.jpg|300px]]
  
 
The total cost for a unit is around 70 euros (plus shipping costs from several suppliers etc).
 
The total cost for a unit is around 70 euros (plus shipping costs from several suppliers etc).
Riga 27: Riga 29:
 
* [http://jeelabs.com/products/usb-bub JeeLabs USB interface] (13.5 euros)
 
* [http://jeelabs.com/products/usb-bub JeeLabs USB interface] (13.5 euros)
 
* another  [http://jeelabs.com/products/jeenode JeeNode v6] (18.5 euros) or a [http://jeelabs.com/products/jeelink JeeLink] (32.5 euros).
 
* another  [http://jeelabs.com/products/jeenode JeeNode v6] (18.5 euros) or a [http://jeelabs.com/products/jeelink JeeLink] (32.5 euros).
 +
 +
=== RAM and wiring card ===
 +
 +
[[File:fridge3.jpg|300px]]

Versione delle 12:45, 16 mag 2013

This is the implementation of the idea to create an electronic fridge magnet.

What is that?

  • It is a battery operated Display
  • A radio wireless connection provides the contents to show

It can be used as a "Internet of Things" implementation of a fridge magnet to show important or interesting information for the family, but can be used as a price/special offer label on the front side of shop shelves.

Here is a picture of the prototype to whet your appetite:

Fridge1.jpg

The components used in this prototype are:

Fridge2.jpg

The total cost for a unit is around 70 euros (plus shipping costs from several suppliers etc).

The following parts are needed to upload the software and to send the images to our display (or to several displays):

RAM and wiring card

Fridge3.jpg