Differenze tra le versioni di "Chip9$ now it's a good Debian GUI"
(Creata pagina con 'Chip 9$ runs jessie Debian and runs Xorg. (There are still details to fix, but it works!) 400px') |
|||
Riga 1: | Riga 1: | ||
− | Chip 9$ runs jessie Debian and | + | Chip 9$ runs jessie Debian and Xorg server (I am running lxde in the picture here below). |
(There are still details to fix, but it works!) | (There are still details to fix, but it works!) | ||
[[File:chiplxde.jpg|400px]] | [[File:chiplxde.jpg|400px]] | ||
+ | |||
+ | == Chronicle of Debian installation == | ||
+ | |||
+ | === fdirst step: load the image === | ||
+ | |||
+ | I have used on my laptop (Debian SID) the procedure described [https://nextthingco.zendesk.com/hc/en-us/articles/209757858-Flashing-C-H-I-P-with-NTC-buildroot-Ubuntu- here] for Ubuntu. | ||
+ | ''I am not using any vagrant/virtualbox virtual machine as I don't want any proprietary virtualbox extension running on my laptop'' | ||
+ | |||
+ | I had a problem during the flashing phase so I am describing it here to help whoever could step on the same issue. | ||
+ | |||
+ | Following the instructions I got this on the terminal where I ran ''./chip-update-firmware.sh -d'' | ||
+ | |||
+ | <pre> | ||
+ | == upload the SPL to SRAM and execute it == | ||
+ | waiting for fel...OK | ||
+ | == upload spl == | ||
+ | == upload u-boot == | ||
+ | == upload u-boot script == | ||
+ | == upload ubi == | ||
+ | Invalid command --progress | ||
+ | == execute the main u-boot binary == | ||
+ | == write ubi == | ||
+ | flashing.......................................................................................................TIMEOUT | ||
+ | ERROR: could not flash | ||
+ | </pre> | ||
+ | |||
+ | The problem was --progess! | ||
+ | If you use standard fel (got from https://github.com/linux-sunxi/sunxi-tools) it does not support --progress, | ||
+ | so to solve the problem either get the git from http://github.com/NextThingCo/sunxi-tools as explained in the instructions or delete the --progress option in chip-fel-flash.sh line 146. |
Versione delle 10:01, 23 ott 2015
Chip 9$ runs jessie Debian and Xorg server (I am running lxde in the picture here below).
(There are still details to fix, but it works!)
Chronicle of Debian installation
fdirst step: load the image
I have used on my laptop (Debian SID) the procedure described here for Ubuntu. I am not using any vagrant/virtualbox virtual machine as I don't want any proprietary virtualbox extension running on my laptop
I had a problem during the flashing phase so I am describing it here to help whoever could step on the same issue.
Following the instructions I got this on the terminal where I ran ./chip-update-firmware.sh -d
== upload the SPL to SRAM and execute it == waiting for fel...OK == upload spl == == upload u-boot == == upload u-boot script == == upload ubi == Invalid command --progress == execute the main u-boot binary == == write ubi == flashing.......................................................................................................TIMEOUT ERROR: could not flash
The problem was --progess! If you use standard fel (got from https://github.com/linux-sunxi/sunxi-tools) it does not support --progress, so to solve the problem either get the git from http://github.com/NextThingCo/sunxi-tools as explained in the instructions or delete the --progress option in chip-fel-flash.sh line 146.