Differenze tra le versioni di "Gruppo Meteo/HowTo/LorawanGateway"
Jump to navigation
Jump to search
(Creata pagina con '= LoRaWAN Gateway on rapberry, IMST iC880A Concentrator 868MHz, Centos 7 = == Assemble the gateway == Parts: * Raspberry 3 * iC880A - LoRaWAN® Concentrator 868MHz https://w...') |
|||
| Riga 34: | Riga 34: | ||
cd /etc/yum.repos.d | cd /etc/yum.repos.d | ||
wget http://rmap.cc/repo/ttn/rmapcentos.repo | wget http://rmap.cc/repo/ttn/rmapcentos.repo | ||
| + | |||
| + | |||
| + | change root password! | ||
| + | |||
| + | == Autossh == | ||
| + | |||
| + | * attivare autossh, ossia un tunneling ssh su macchina pubblica per | ||
| + | permettere l'accesso remoto di amministrazione; infatti la connesione | ||
| + | tramite wifi o ethernet o GSM non espongono un ip pubblico (almeno | ||
| + | senza fare un reindirizzamento di porta): | ||
| + | |||
| + | yum install autossh | ||
| + | da root: | ||
| + | ssh-keygen | ||
| + | ssh-copy-id | ||
| + | |||
| + | /usr/lib/systemd/system/autossh.service | ||
| + | [Unit] | ||
| + | Description=Autossh tunneling | ||
| + | After=network.target | ||
| + | |||
| + | [Service] | ||
| + | #User=ttn | ||
| + | #Group=ttn | ||
| + | WorkingDirectory=/root | ||
| + | #ExecStart=/usr/bin/autossh -M 5023 -N -R 5022:localhost:22 pat1@ttn.rmap.it | ||
| + | ExecStart=/usr/bin/autossh -M 0 -o "ServerAliveInterval 60" -o "ServerAliveCountMax 3" -N -R 5022:localhost:22 <user>@<remotehost> | ||
| + | SyslogIdentifier=autossh | ||
| + | Restart=always | ||
| + | RestartSec=30 | ||
| + | |||
| + | [Install] | ||
| + | WantedBy=multi-user.target | ||
| + | |||
| + | systemctl daemon-reload | ||
| + | service autossh start | ||
| + | chkconfig autossh on | ||
| + | |||
| + | ora dalla macchina remota si può fare: | ||
| + | ssh root@localhost -p5022 | ||
Versione delle 13:30, 19 mar 2018
LoRaWAN Gateway on rapberry, IMST iC880A Concentrator 868MHz, Centos 7
Assemble the gateway
Parts:
- Raspberry 3
- iC880A - LoRaWAN® Concentrator 868MHz https://wireless-solutions.de/products/long-range-radio/ic880a.html
- IP65 Box
- LM2596 DC-DC 3-35V adjustable step-down power Supply module http://hobbycomponents.com/power/215-lm2596-dc-dc-3-35v-adjustable-step-down-power-supply-module
- 2200uF capacitor
- internet key with SIM card
Assemble the gateway as described at: https://github.com/ttn-zh/ic880a-gateway/wiki
Regulate the DC-DC power Supply to output 5.0V Connect the capacitor to the output of DC-DC power Supply
Operative system
Follow https://wiki.centos.org/SpecialInterestGroup/AltArch/Arm32/RaspberryPi3
enable epel:
cat > /etc/yum.repos.d/epel.repo << EOF [epel] name=Epel rebuild for armhfp baseurl=https://armv7.dev.centos.org/repodir/epel-pass-1/ enabled=1 gpgcheck=0 EOF
enable ttn:
cd /etc/yum.repos.d wget http://rmap.cc/repo/ttn/rmapcentos.repo
change root password!
Autossh
- attivare autossh, ossia un tunneling ssh su macchina pubblica per
permettere l'accesso remoto di amministrazione; infatti la connesione tramite wifi o ethernet o GSM non espongono un ip pubblico (almeno senza fare un reindirizzamento di porta):
yum install autossh da root:
ssh-keygen ssh-copy-id
/usr/lib/systemd/system/autossh.service
[Unit] Description=Autossh tunneling After=network.target [Service] #User=ttn #Group=ttn WorkingDirectory=/root #ExecStart=/usr/bin/autossh -M 5023 -N -R 5022:localhost:22 pat1@ttn.rmap.it ExecStart=/usr/bin/autossh -M 0 -o "ServerAliveInterval 60" -o "ServerAliveCountMax 3" -N -R 5022:localhost:22 <user>@<remotehost> SyslogIdentifier=autossh Restart=always RestartSec=30 [Install] WantedBy=multi-user.target
systemctl daemon-reload service autossh start chkconfig autossh on
ora dalla macchina remota si può fare:
ssh root@localhost -p5022