RTL-SDR
Installazione
(da: http://zr6aic.blogspot.dk/2013/02/setting-up-my-raspberry-pi-as-sdr-server.html)
First update you Raspberry Pi wheezy Linux to the latest version.
sudo apt-get update
Now install the required utils to compile the RTL-2832U USB dongle driver
sudo apt-get install git cmake libusb-1.0-0-dev build-essential
Now install the RTL-2832U USB dongle driver src and compile
git clone git://git.osmocom.org/rtl-sdr.git
cd rtl-sdr/
mkdir build
cd build
cmake ../ -DINSTALL_UDEV_RULES=ON
make
sudo make install
sudo ldconfig
if it was successful you should see no return on the previous command.
I have been told that the Raspberry crash if you don't reboot before inserting the dongle.
so just run sudo shutdown -r 0
Install the RTL-2832U USB dongle on external powered USB HUB
sudo ldconfig
ADSB
(da: http://www.satsignal.eu/raspberry-pi/dump1090.html)
E' possibile ricevere le posizioni degli aerei in volo ricevendo i segnali inviati dai trasponder.
Installazione:
cd ~ (goes to your home directory)
git clone git://github.com/MalcolmRobb/dump1090.git
cd dump1090
make
./dump1090 --interactive