Differenze tra le versioni di "Some experiments on Radio Remote Controls"
Jump to navigation
Jump to search
(Creata pagina con '== Arduino and Radio Controller Socket sets === I have bought a kit by avidsen including a socket and a remote. File:avidsensocket.jpg My goal was twice. I wanted to co...') |
|||
| Riga 1: | Riga 1: | ||
| − | == Arduino and Radio Controller | + | == Arduino and Radio Controller Sockets == |
I have bought a kit by avidsen including a socket and a remote. | I have bought a kit by avidsen including a socket and a remote. | ||
| Riga 15: | Riga 15: | ||
There is already a library named RC-Switch. It can be downloaded from github. | There is already a library named RC-Switch. It can be downloaded from github. | ||
| − | This is its latest release: [https://github.com/sui77/rc-switch/releases/tag/v2.52] | + | This is its latest release: [https://github.com/sui77/rc-switch/releases/tag/v2.52 https://github.com/sui77/rc-switch/releases/tag/v2.52]. |
Versione delle 15:58, 4 giu 2016
Arduino and Radio Controller Sockets
I have bought a kit by avidsen including a socket and a remote.
My goal was twice. I wanted to control avidsen sockets using an arduino and to get commands from a avidsen remote.
For that I have taken a set of RX and TX 433.92Mhz modules. This kind of modules are very common on e-bay.
They are usually provided without an antenna: they need a 17.3 cm wire soldered to the ANT labelled terminal.
There is already a library named RC-Switch. It can be downloaded from github. This is its latest release: https://github.com/sui77/rc-switch/releases/tag/v2.52.