Some experiments on Radio Remote Controls
Versione del 4 giu 2016 alle 15:57 di Renzo (discussione | contributi) (Creata pagina con '== Arduino and Radio Controller Socket sets === I have bought a kit by avidsen including a socket and a remote. File:avidsensocket.jpg My goal was twice. I wanted to co...')
Arduino and Radio Controller Socket sets =
I have bought a kit by avidsen including a socket and a remote.
My goal was twice. I wanted to control avidsen sockets using an arduino and to get commands from a avidsen remote.
For that I have taken a set of RX and TX 433.92Mhz modules. This kind of modules are very common on e-bay.
They are usually provided without an antenna: they need a 17.3 cm wire soldered to the ANT labelled terminal.
There is already a library named RC-Switch. It can be downloaded from github. This is its latest release: [1]