Gruppo Meteo/HowTo/server-centos - Cronologia

PaoloPatruno: /* istallazione sistema operativo */

2020-07-13T07:38:17Z

istallazione sistema operativo

PaoloPatruno: /* istallazione sistema operativo */

2020-07-13T07:29:38Z

istallazione sistema operativo

PaoloPatruno: /* istallazione sistema operativo */

2020-07-13T07:28:55Z

istallazione sistema operativo

PaoloPatruno: /* apache */

2020-03-10T17:21:53Z

apache

PaoloPatruno: /* Arkimet */

2020-03-10T17:14:24Z

Arkimet

PaoloPatruno: /* Arkimet */

2020-02-13T14:40:25Z

Arkimet

PaoloPatruno: /* Arkimet */

2020-02-13T14:32:30Z

Arkimet

PaoloPatruno: /* Arkiweb */

2020-02-12T15:59:27Z

Arkiweb

PaoloPatruno: /* Cron */

2020-02-12T15:53:11Z

Cron

PaoloPatruno: /* Monit */

2020-02-12T15:24:02Z

Monit

@@ Riga 3: / Riga 3: @@
 == istallazione sistema operativo ==
-useradd rmap
+  dnf -y install epel-release
   dnf install yum-plugin-copr
   dnf copr enable simc/stable
   dnf copr enable pat1/rmap
-  dnf config-manager --set-enabled PowerTools
+  dnf config-manager --set-enabled PowerTool
+ dnf groupinstall rmap
   dnf install mosquitto mosquitto-auth-plug
   dnf install arkimet
-  dnf install python3-rmap
+  useradd rmap

@@ Riga 7: / Riga 7: @@
 add epel repository:
   yum -y install epel-release
   dnf install yum-plugin-copr

@@ Riga 5: / Riga 5: @@
 useradd rmap
-add epel repository
+add epel repository:
   cd /etc/yum.repos.d

← Versione meno recente		Versione delle 17:21, 10 mar 2020
Riga 219:		Riga 219:
	Allow from 127.0.0.1		Allow from 127.0.0.1
	</Location>		</Location>
		+
		+	SecRuleEngine On
		+
		+	#The first SecAction initializes the state, in this case by IP address.
		+	#The second SecAction deprecates the counter by 1 every 60 second.
		+	#This is setting the base rate of our rate limit
		+	#Then the Header definition ensures a header is set whenever a request
		+	#is rate limited, giving a hint to the client that they shouldn’t try
		+	#again for 10 seconds. This is obviously just a guide and a lot of
		+	#clients don’t implement it (and it’s really only valid on a 503 status
		+	#anyway) so it’s a little bit of wishful thinking really.
		+	#Then we define a neat ErrorDocument for the 509 response to give a better clue to the client about what is happening.
		+
		+
		+	<Location /borinud>
		+
		+	# whitelist localhost
		+	#SecRule REMOTE_ADDR "@contains 127.0.0.1" "id:1,phase:1,nolog,allow,ctl:ruleEngine=Off"
		+	SecRule REMOTE_ADDR "^127.0.0.1$" nolog,allow,id:1
		+
		+	# initialise the state based on ip address
		+	SecAction id:2,initcol:IP=%{REMOTE_ADDR}
		+
		+	# set the base rate to one per 15 minutes
		+	SecAction id:3,deprecatevar:IP.CALLS_LIMIT=1/900
		+
		+	# if greater then burst_rate_limit then pause set RATELIMITED var and then return 503
		+	SecRule IP:CALLS_LIMIT "@gt 60" "id:4,phase:2,pause:300,deny,status:503,setenv:RATELIMITED,skip:1"
		+
		+	# if above rule doesnt match increment the count
		+	SecAction id:5,setvar:IP.CALLS_LIMIT=+1
		+
		+	# set a header when ratelimited
		+	Header always set Retry-After "10" env=RATELIMITED
		+
		+	</Location>
		+
		+	ErrorDocument 503 "Service Unavailable"

@@ Riga 239: / Riga 239: @@
   DATASET_CONFIG="/rmap/arkimet/arkimet.conf"
-add in /etc/arkimet/scan-bufr/generic.lua
+Create file /etc/arkimet/scan/bufr_generic_mobile_rmap.py:
-    local area = nil
-     if report:enqc() == "mobile"
+ from arkimet.scan.bufr import Scanner, read_area_mobile, read_proddef
-    then
-         area = bufr_read_area_mobile(msg)
-    else
+ def scan(msg, md):
-         area = bufr_read_area_fixed(msg)
+     if msg.report == "mobile":
-     end
+         area = read_area_mobile(msg)
   systemctl daemon-reload

@@ Riga 226: / Riga 226: @@
 == Arkimet ==
   useradd  -r arkimet
   mkdir /home/arkimet

@@ Riga 231: / Riga 231: @@
   mkdir /rmap/arkimet/
   chown -R arkimet:arkimet /rmap/arkimet/
 /etc/sysconfig/arkimet

@@ Riga 427: / Riga 427: @@
 == Arkiweb ==
-  yum install arkimet arkiweb
 /etc/httpd/conf.d/arkiweb.conf
@@ Riga 588: / Riga 592: @@
   type = remote
   unique = reftime, area, product, origin, proddef
 = Installazione RMAP server su centos 7 =

@@ Riga 421: / Riga 421: @@
   cd /etc/cron.d
-  https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/arpae_aq_ckan
+  wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/arpae_aq_ckan
-  https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/dballe2arkimet
+  wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/dballe2arkimet
-  https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/luftdatem
+  wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/luftdaten
-  https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/rmap_generate_summary_cache
+  wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/cron.d/rmap_generate_summary_cache
 == Arkiweb ==

← Versione meno recente		Versione delle 15:24, 12 feb 2020
Riga 411:		Riga 411:
	include /etc/monit.d/*		include /etc/monit.d/*

−	~~rm /etc/monit.d/logging~~

		+	cd /etc/monit.d/
	wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/monit.d/rmap		wget https://raw.githubusercontent.com/r-map/rmap/master/server/etc/monit.d/rmap